Results 1 to 10 of 13
Thread: Will a rxp impeller fit a rxt ?
-
07-12-2005, 12:44 PM #1
Will a rxp impeller fit a rxt ?
Anyone know if a rxp impeller can go into a RXT ?
I have emailed impros but still waiting...
-
07-12-2005, 12:46 PM #2
Yes it will, all 4-tec's use the same pump.
-
07-12-2005, 01:21 PM #3
- Join Date
- Apr 2005
- Location
- Elysian Fields,Tx
- Posts
- 358
- +1
- 1
Yes the props will fit,pitch different. I have heard that a repitched RXP prop works really well on the RXT. I have not tried it myself.
-
07-12-2005, 01:24 PM #4
05Limited is running my old Impros pitched 12/19.5 stock RXP impeller in his GTX Limited with great results.
-
07-12-2005, 02:05 PM #5
I'll vouch for that... 71.8 @8100
Jeff
-
07-12-2005, 05:08 PM #6
too late
limited already bought it from nitro
I'll just mail mine in during the winter.
-
07-12-2005, 05:35 PM #7
Kinchyle,
What mods have you done to your RXT?
We've got to run to a powerboat in a few minutes, but let's compare notes later. We might be able to help out with an impeller.
Jeff & Annette
-
07-12-2005, 08:59 PM #8
Originally Posted by INDY27
well, that's not exactly correct. Not all 4-tecs use the same pump. They all use the same pump housing, but some use different internals. Not 100% sure about the rxt, but, the GTX SC uses a different impeller (155mm instead of 159mm), wear ring, and impeller shaft. The drive shafts of the RXP are considerably larger than the GTX SC/NA's
Not 100% sure, but the RXT may use the 155mm impeller setup also.
-
07-12-2005, 09:13 PM #9
- Join Date
- Apr 2005
- Location
- Elysian Fields,Tx
- Posts
- 358
- +1
- 1
The GTX SC,RXT,RXP pumps are the same only the wear ring is different on the RXT and RXP. Yes the drive shaft is larger on the RXT and RXP and the props are bigger but the shaft in the pumps are the same.The early '03 model GTX SC had a Plastic pump housing that was not strong enough to stand up to the power so they all now have the all aluminum housing.
-
07-13-2005, 12:11 AM #10
yep I was wrong on the impeller shaft. they are the same (in the metal pumps)
but as a whole, not all 4 tec pumps are the same. 03's (and a few early release 04 GTX SC's) used a completely different pump as Kinchyle said. If the rxt does use the 155mm impeller (which I'm not sure), you should be able to get the RXP impeller to work if you put an RXP wear ring in.
One thing I did notice is that on the riva racing edition RXP Riva used a 14/19 concord. On the Riva Racing Edition RXT, Rivaused a 14/17 concord.
btw I've attached guide for the 04 4-tec pumps.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
would a 2009 rxp impeller fit a 2004 rxp???
By aftershocked38 in forum 4-Tec PerformanceReplies: 1Last Post: 10-07-2012, 09:33 PM -
what will i need to fit a 2007 rxt motor, pump , electronics, gas tank into a rxp hul
By bksbigboy69 in forum 4-Tec PerformanceReplies: 1Last Post: 06-23-2011, 04:23 PM -
Will a 2rude impeller fit straight on an x-charger?
By t_hoang02 in forum 4-Tec PerformanceReplies: 6Last Post: 09-14-2009, 11:01 PM -
Will a riva Rxp intake fit both the Rxp and the Rxt??
By Sosa62 in forum 4-Tec PerformanceReplies: 9Last Post: 08-20-2007, 09:08 PM -
will a RXP pump fit in a XPL pump shoe????
By rapidacceleration in forum 4-Tec PerformanceReplies: 4Last Post: 07-04-2006, 10:18 AM
The exhaust side of the head has little air vents or bleeds in each...
Big problems with my STX 15