Results 1 to 8 of 8
Thread: Impeller change/removal
-
01-09-2009, 09:59 PM #1
- Join Date
- Aug 2008
- Location
- Cinnaminson, NJ
- Posts
- 3
Impeller change/removal
Does anyone have a diagram or know how to pry off the jet pump to get to the impeller? I have a 08 VX Deluxe and want to change the impeller. Just looking for some pointers. Thanks.
-
01-10-2009, 09:59 AM #2
Remove the rideplate, and you should see 2 pry points on the starboard side of the pump, one between the exit nozzle & pump & one farther forward to remove the pump. Once the pump is out you will need a shaft holding tool to remove the impeller.
-
01-10-2009, 10:02 AM #3
impeller removal pump removal
Pump Removal
http://www.cajundude.com/jetpumpremovalimpeller.htm
Impeller Removal
http://www.cajundude.com/impellerinstall.htm
Stuck/Frozen Pump
http://greenhulk.net/forums/showpost...48&postcount=8
post #8
http://greenhulk.net/forums/showthre...748#post223748
Also, a little heat from a propane torch helps alot. Heat the hub.
Apply Antisieze upon reinstallation
Last edited by RX951; 01-12-2009 at 10:12 AM.
-
01-12-2009, 08:50 AM #4
- Join Date
- Jan 2009
- Posts
- 1
Great replies.
Brian
-
01-12-2009, 10:11 AM #5
welcome to the forum Brian
-
01-12-2009, 12:17 PM #6
-
01-12-2009, 02:30 PM #7
- Join Date
- Aug 2008
- Location
- Cinnaminson, NJ
- Posts
- 3
Thank you!
I want to thank all of you for the replies. With the help of your advice and pictures, we were able to successfully remove the impeller.
Tanya
-
01-12-2009, 03:22 PM #8
Glad you got it out OK
. Just remember to use some anti-sieze when you reinstall. Welcome to the forum.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
changing impeller, shaft removal and f^*^$*&^$*k me.... :_(
By zero2espect in forum Yamaha PWC Performance (4-stroke)Replies: 2Last Post: 07-20-2013, 03:56 PM -
removing driveshaft for impeller change.
By yami_rida#26 in forum Yamaha How To & FAQsReplies: 5Last Post: 04-20-2008, 09:49 PM -
Stock Impeller Change
By mgurgone in forum Sea Doo Sport BoatsReplies: 16Last Post: 05-15-2007, 11:47 PM -
Wear Ring & Impeller Change
By WaskesiuDoo in forum Sea Doo Sport BoatsReplies: 2Last Post: 04-26-2007, 09:16 AM -
Impeller cone removal works!!!
By TorquePhoto in forum 4-Tec PerformanceReplies: 14Last Post: 07-29-2006, 03:44 PM
Well I can only give you my experience. My wife and I were going across...
Buying used 2020 RXPX 300