Pins for A/F and Boost gauges

[HOSS]

Where is everyone getting them from? Part # would help. I know this is listed in technical but can`t make out the numbers.

Thanks

[friebe1]

for the large spade female 278000994
seal for the large spade female 278000996
round small tube female 278000995
no extra seals needed for the small ones
Steve

[excess]

how many do we need of each for the install?

[HOSS]

for the large spade female 278000994
seal for the large spade female 278000996
round small tube female 278000995
no extra seals needed for the small ones
Steve

who`s part numbers are those? Not NAPA

[friebe1]

Sorry my bad,
they are Bombardier part numbers

[HOSS]

Thanks.

[excess]

do we just need one of each to stay on the ski?

[HOSS]

I`m getting 3 ea. Allows for a mess up.

[friebe1]

for an 04 you just need the large female spade and seal. Use pin 2-25 as described in the other thread. The spare outlet will need to activated with buds for that pin to have power

For 05 and 06 you can use the little tube one
on pin 2-20 which is for the depth sounder, the depth sounder will need to be activated with buds for this terminal to have power, and you will have the depth gauge appear but just flash 2 dashes all the time. I am trying to find a better way for switched power on the 05-06. Going to try a couple things tonight.

If anyone has it worked out I would appreciate the info, dont need to re-invent the wheel.
Thanks, Steve

[excess]

did you ever see the post jerry made about plugging into the fuse instead, do you think that that will be less work and just as good without the flasher.