Results 1 to 10 of 28
Thread: I Finally Make IT! 80 MPH
-
07-22-2006, 09:28 PM #1
I Finally Make IT! 80 MPH
Last week after installing all my new goodies that came from santa
I went out for a test run. Initially it felt pretty good and I got 1 run in some clean water and it went right up to 78 but I ran out of room so I continued riding and when I got the chance again could only hit 74
74 mph @ 8250 rpm and 9 psi. W.T.F. is going on here. Thought it might be the 42lbs injectors, maybe it was too rich being that it was 97 degrees out. Nope that wasnt it, come to find out that the intake grate inserts had poped out and I had bigtime DRAG.
. So after fixing the problem I went out today and here are my results: 85 degree air temp.
84 degree water temp
Rpm's between 8380 and 8440(pretty consistant)
Consistant 79 +'s w/ full tank
80.0-80.7 half tank (8 runs)
Here is the proof!
-
07-22-2006, 09:30 PM #2
congrats!!!!
more importantly... how did u fix ur inserts bc i had the same problem... ran awesome, then lost speed, took it out and saw i yanked all the inserts out. wondering how u fixed urs?
-
07-22-2006, 09:30 PM #3
-
07-22-2006, 09:33 PM #4
Shibby pm me and send me your email and I will send you all the pic's I took too many to put on here but I fixed her up real good even the intake grate. It will hold on even better now!
-
07-22-2006, 09:36 PM #5
Mods are basicly a Riva stage II with the RR wheel and 42# injectors.
-
07-22-2006, 09:49 PM #6
- Join Date
- May 2005
- Posts
- 4
i seen all the runs and they were no fun
from behind
-
07-22-2006, 10:14 PM #7
-
07-22-2006, 10:16 PM #8
Hey Muddy..........DONT QUIT YOUR DAY JOB!!!!
-
07-22-2006, 10:17 PM #9
suckmywake.. u get my PM?
e-mail me... shibby1485@hotmail.com
-
07-22-2006, 10:18 PM #10
Yea shibby, you got mail or at least you should have
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Finally in the 80 mph club!!!
By WickedXP in forum 4-Tec PerformanceReplies: 30Last Post: 09-20-2014, 10:50 PM -
Finally in the 80 mph club!
By ncdoo in forum 4-Tec PerformanceReplies: 17Last Post: 09-20-2014, 09:26 PM -
Whats It take to get a 06 RXT to consistently do 80 mph??
By hotbird in forum 4-Tec PerformanceReplies: 104Last Post: 07-27-2013, 10:20 PM -
What does it cost to build an 80 MPH GPR?
By Jarrett in forum Yamaha PWC Performance (2-stroke)Replies: 92Last Post: 11-30-2008, 11:50 PM -
What it take for a 80+ mph GPR?
By codymouse54321 in forum Yamaha Open DiscussionReplies: 7Last Post: 09-15-2007, 10:56 PM
K&N shows the KN204-1 as fitment for Ultra 310s up to 2018. Does anyone...
Will KN204-1 Oil Filter Fit a 2021...