Results 1 to 3 of 3
Thread: i need help!!
-
06-21-2008, 09:28 AM #1
i need help!!
So my buddy and i were out riding and he sucked some long piece of plastic up into his impeller. Now his RPM's are spiking, and he cant go fast and the unit is vibrating.
Classic case of something wrapped around the impeller/shaft. I took a look and it really is wrapped to the point where i cant get it out without taking the impeller out.
I need some very good directions or tutorial on how to take the impeller out of his 2003 GTX!!
Please Help Green hulk Fella's
Roger
-
06-21-2008, 09:35 AM #2
go to how to section and you should find "how to remove pump and impellor" in top stickys. very easy.
you will need :
small drive socket with 10 mm
10 mm open end wrench
13 mm socket
17 mm socket
rachet extension for pump and venturi bolts
you also might need a small star or allen for vts depending on bolt head size.
If you have to remove impellor you will need impellor tool and I dont remember the allen size for pump but is a big size.
hope that helps.Last edited by skoepp; 06-21-2008 at 09:41 AM.
-
06-21-2008, 10:24 AM #3
Here is the thread skoepp was talking about..Good luck..
http://www.greenhulk.net/forums/showthread.php?t=536
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
NEED HELP!!!!!
By MartyRXP in forum 4-Tec PerformanceReplies: 15Last Post: 05-20-2018, 11:35 PM -
new 05 RXT NEED HELP
By RXPNJ in forum 4-Tec PerformanceReplies: 12Last Post: 07-03-2009, 12:16 PM -
NEED HELP URGENT(HULK) RXP DOWN
By macattack in forum 4-Tec PerformanceReplies: 28Last Post: 11-22-2005, 02:39 PM -
My 2 RXP's need HELP!
By Tube Master in forum 4-Tec PerformanceReplies: 21Last Post: 07-19-2005, 09:44 PM -
I need help remove stock intercooler
By orc in forum 4-Tec PerformanceReplies: 3Last Post: 05-13-2005, 04:08 PM
A local hardware store will have the oil line tubing and they typically...
Leak Below Oil Tank (not the neck)...