What size T bolt clamps

[GYTWYPT]

I got the link to the all stainless clamps, but I did not measure my hoses, and the ski is way out in the back building and I wouldnt mind ordering some tonight.
Can anyone tell me what size clamps I need to take care of both hoses??

thanks
Joe

[skoepp]

what kind of ski and what hoses?

[GYTWYPT]

what kind of ski and what hoses?

Oh Hell my bad. 06 RXP the SC hoses
I just sent my SC to Jerry this morning Priority for some washers and bearings. Hopefully he sees it monday or tues at the latest. Shootin for a return before the first of the month. Need some clamps so I can get it all back together before I leave on the 3rd.

thanks guys.
Joe

[skoepp]

3 inch
Good Luck!

[GYTWYPT]

Outstanding!!!!! Thank You.

and to make sure it is 3 in for both hoses? I want to replace the two worm dirves also.

Joe

[JFizzleJR]

Yes, 3" for the throttle body too.

[GYTWYPT]

Yes, 3" for the throttle body too.

That is good to know. Cause I already ordered four last night. I should be ready to go upon the return of my SC. Looks like it should all come together in time for my vacation. yipeeeee

thanks again all
Joe

[JFizzleJR]

Sh*t dude. I wasn't thinking at all when I posted that. 3" might work, but I used 2.5" for the throttle body and supercharger outlet. I only use 3" for clamping the air intake hose to the supercharger. I think I have 1 2.5" t-bolt left if you want me to send it to you.

[skoepp]

Fiz, i think it all depends of the clamps. I used 3 inch on all my Sc to ic to tb hook up. not sure if the stock hoses are a little less in circumference then what we are running on XS setup but 3 inch should work, i think.

[GYTWYPT]

Guess we will find out. Maybe I will go ahead and order a couple 2.5" also. I was kinda thiking that one hose looked a little smaller than the other but Oh well If the SC gets back in time I will make something work.

thanks
Joe