Results 1 to 10 of 101
-
06-19-2008, 08:41 PM #1
Parting out modded GPR - XLT stuff also
Gas Valves set up for 1300. These were new blades from Lowell this year - 10 hours on them $385. Green bellows red spring. Sold
XLT/GPR 87mm 5 Degree nozzle with the holes tapped for reverse bucket. This is one of the best mods available for the XLT hull. $110
Advent $350 Sold
Jet Works Kit with stealth fitting/gasket/clamps/hose/billet cooling plate and through hull fitting. Valve is brand new never used $125. I will give you the stinger if you pay shipping. Sold
R&D 1300 heads recut for 160lbs compression #1 has some minor dings but it will not hinder performance @ all $200 W/Girdle kit and all fittings to run it. I had to repaint them since there was some flaking when I used carb cleaner to clean them. They look nice.
Modded OEM Carbs with returns opened up I will send the inline restrictor. Have lots of jetting - they were completely rebuilt this year. Absolutely no corrosion anywhere - High and low speed t-handles and acc pump bypass kit from Carl $425. Sold
VF3 Reeds with bolts w/ modded pro-trec stuffer - great for carb set ups. $375 for reeds/spacer w/ Lowell's new gaskets (these are reuseable) $145 for stuffer. I will send longer bolts for who ever buys the stuffer (dont think you can use on EFI ski's) Sold.
1 set Riva FA's with adapters $115 (slighty used) Sold
1 set Riva FA's with brand new adapters (never opened) and the FA's and prefilters look perfect $135. Sold
2-1300 Waterboxes $100 each - this was one of the best mods I did for my GPR and XLT
1-Pet2100 Tach integrated into glovebox lid. The tach is mounted in a frame (see pic) $180. There was allot of effort put into this lid and it shows.
OEM 150lb Compression head for 1200. Not run since cut by Jim it has very few hours on it. $150 Sold
Brand spanking new black/red XLT cover $130 (shipped) sold
Black GH gas cap set up with new filler neck /gaskets and nut for inside of the hull $75 shipped.
Danny's gpr sponsons with plastic and metal blades $150 Sale Pending
66v exhaust manifold - the cooling fitting on the left side was removed and filled with high temp RTV to let the pipe get hotter $25.
Polished UMI Polished FInger throttle (like new) $40 you will need the adapters Sold
Brand new black UMI finger throttle $50 you will need the adapter Sold
XLT 3 Degree nozzle $75 Sold
Trim Ring - $20 Sale Pending
R&D Extended tabs $110 Sold
New D-PLate and chip $80 sale pending
Used D-Plate $40 Sold
Opened up D-Plate (.200) $60 Sold
Exhaust temp sensor (bottom one) only 10 hours ($40).
There will be more to come. None of this is junk. If I wouldnt put it on my ski I wouldnt sell it.
added -
Clean Cases w/bolts and rear mounts $275
Front Cover $100 Sold
Like new OEM Starter (10 hours) - it was 100% new this year (not rebuilt) $150 Sold
added again
Prop Gauge $55 Sold
1300 PV's with Billet Couplers (do not need WaveEaters with these) $75 Sold
added again again
05+ Pump Shoe one peice pump brackets $20 shipped Sold
ACC Pump bypass kit (spray painted black but new) $20 shipped Sold
added again
Flywheel
Bendix Sale Pending
Electrical box w / NGK wires and OEM CDI
Oil Pump
1200r Gauge (115 hours)
1200r Gauge (unknown hours) SoldLast edited by mrbtd; 06-26-2008 at 08:02 AM.
-
06-19-2008, 08:48 PM #2
?
Hey there mrtbd..
PM'd you on some of this stuff...!!!
Gerry
-
06-19-2008, 08:58 PM #3
-
06-19-2008, 09:08 PM #4
-
06-19-2008, 09:25 PM #5
I want the black throttle lever. I wont need it for quite a while so take care of your other stuff first. Mine is absolutely NO RUSH. PM me and let me know how you would like for me to pay and a total. Thanks.
BTW, it was great meeting you and dhoad at MB.
-
06-19-2008, 09:25 PM #6
Dangit, didn't even see that up there!
Second dibs on the jetworks if Yami doesn't end up buying it!
-
06-19-2008, 09:41 PM #7
- Join Date
- Apr 2007
- Location
- JUST NORTH OF CUBA-- FL,KEYS
- Posts
- 2,871
- +1
- 137
JIMS PERF. cut stock head please ---33036
mattman
-
06-19-2008, 10:26 PM #8
I hope you are not giving up on us
-
06-19-2008, 10:33 PM #9
- Join Date
- Mar 2007
- Posts
- 182
- +1
- 1
interested in the vf3s(how many hrs) and 5 deg nozzle and possibley 1300 water box.. what was the gain by doing the 1300 water box?? 2jzrx7@comcast.net is my email
Greg
-
06-20-2008, 05:36 AM #10
Guys - I logged on to load pics this morning and something is wrong with my card reader or my card. I will get them up tonight after 8:00 C.S.T. I realize how much nicer it is with pics.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Parting out 06 GPR engine, electronics, and exhaust
By jeffsntx in forum Yamaha ClassifiedsReplies: 57Last Post: 03-17-2016, 09:55 AM -
FS parting out modded rxp lots of stuff for sale!!
By seadoo02xp in forum Sea Doo ClassifiedsReplies: 26Last Post: 08-02-2010, 11:14 PM -
FS parting out mods on 08 1300
By 08GPR in forum Yamaha ClassifiedsReplies: 44Last Post: 02-25-2009, 03:30 AM -
Parting out 2000 GPR
By Glenozzy in forum Yamaha ClassifiedsReplies: 37Last Post: 06-05-2008, 06:46 PM -
94 XP To sell or part out, lots of performance stuff...
By Rodneyae in forum 2-Stroke PerformanceReplies: 11Last Post: 02-25-2008, 01:03 AM
Ran across this .. Can you explain more about how nose down makes water...
Water leak from 90° Fitting Elbow...