Results 1 to 10 of 21
-
07-04-2006, 09:00 PM #1
XSpower IC and RXP install post Pics, HELP.
Guys I am in the process of fabbing up my Xspower IC and man this thing is HUGE. I would like to make it fit around my Exhaust.
Please post your pictures and give your install tips.
..
-
07-04-2006, 09:58 PM #2
-
07-05-2006, 09:39 AM #3
http://www.greenhulk.net/4tec/showth...4951#post74951
3-4 posts down
-
07-05-2006, 01:44 PM #4
- Join Date
- May 2005
- Location
- santa clarita ca
- Posts
- 37
XS power IC and Install post Pic,Help.
I have found that the XS is to large to allow the stock exaust to be used even with 2.5" tubes. This is the bracket I fabbed up to mount it. Notice that it extends all of the way to the inside sponson mounting screws. It's extremely solid. I padded the plate to keep the vibration effect on the IC to a minimum. I used the same design on my RXT. Both have rear exaust.Hope this helps
-
07-05-2006, 01:55 PM #5
[quote=rxprxtcurtI have found that the XS is to large to allow the stock exaust to be used even with 2.5" tubes. This is the bracket I fabbed up to mount it. Notice that it extends all of the way to the inside sponson mounting screws. It's extremely solid. I padded the plate to keep the vibration effect on the IC to a minimum. I used the same design on my RXT. Both have rear exaust.Hope this helps[/quote]
WOWThat is the best mount I have seen yet.
I'm able to use my stock exhaust. Except I used a SS joiner instead of a flow thru. Also why do you have the SC to IC wrapped ? Wouldn't temperatures of that tube exceed the hull temps ?
-
07-05-2006, 02:10 PM #6
- Join Date
- May 2005
- Location
- santa clarita ca
- Posts
- 37
XSpower IC and RXP install post Pics, HELP.
Yes, the pipe from the SC to the IC is hotter. I was trying to keep the heat from that tube away from the other. Maybe it would be better to take the wrap off of the SC to IC and let the heat diffuse into the hull. Both pipes are aluminum. Opinions please.
-
07-05-2006, 02:24 PM #7
All I can say is WOW. I`m hanging mine from the rear deck with aluminum angle. That deffinately looks like a solid sum bitch.
-
07-05-2006, 02:30 PM #8
- Join Date
- May 2005
- Location
- santa clarita ca
- Posts
- 37
XSpower IC and RXP install post Pics, HELP.
Thank You Sir!
-
07-05-2006, 02:31 PM #9
Originally Posted by rxprxtcurt
Very nice mount by the way!
-
07-05-2006, 02:35 PM #10
Originally Posted by rxprxtcurt
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
SOLD 2009 RXP-X Custom Paint and Decals 68Hrs. / Original Owner (Will Post Pics Tomorrow)
By joecbrzx in forum Sea Doo 4Tec SkisReplies: 10Last Post: 03-27-2015, 11:14 AM -
Post pics of your rxp seat covers!
By HemiRamOn22s in forum Sea Doo Open DiscussionReplies: 19Last Post: 06-03-2014, 01:40 PM -
Rxp custom paint job. post pics
By charger in forum 4-Tec PerformanceReplies: 72Last Post: 08-27-2012, 03:06 PM -
Easy; Can stock IC and Exhaust clamps be reused after Riva Air intake install???
By Mikey G. in forum 4-Tec PerformanceReplies: 1Last Post: 07-01-2008, 02:44 PM -
Sirius Radio, Speakers, And Deck install (RXP)
By Gforce in forum Sea Doo Open DiscussionReplies: 6Last Post: 05-11-2006, 08:23 AM
rxp 2019 14hrs, with supertech valves, supertech springs, supertech...
SuperTech Lightweight Valves /...