Page 1 of 2 12 LastLast
Results 1 to 10 of 16
  1. 06-18-2008, 10:31 AM #1
    JFizzleJR
    JFizzleJR is offline
    JFizzleJR's Avatar
    Join Date
    Aug 2005
    Location
    FL
    Posts
    8,830
    +1
    965

    RXP & RXT Nozzles

    Are the venturi nozzles on the RXP and RXT the same? Just one doesn't have a trim ring?
    Reply With Quote Reply With Quote

  2. 06-18-2008, 10:35 AM #2
    speedskixp
    speedskixp is offline
    speedskixp's Avatar
    Join Date
    Feb 2008
    Location
    venice fl.
    Posts
    7,932
    +1
    121
    I think they are but I will check tonight. The rxt does have a threaded hole in the top of the nozzle for the opas though. You would need to plug it. I will let you know.
    Jim
    Reply With Quote Reply With Quote
  3. 06-19-2008, 11:00 PM #3
    speedskixp
    speedskixp is offline
    speedskixp's Avatar
    Join Date
    Feb 2008
    Location
    venice fl.
    Posts
    7,932
    +1
    121
    They are the same except for what I mentioned above.
    Reply With Quote Reply With Quote
  4. 06-19-2008, 11:11 PM #4
    05Limited
    05Limited is offline
    Gotta love this sport! 05Limited's Avatar
    Join Date
    Apr 2005
    Location
    Stockton, CA
    Posts
    2,660
    +1
    4
    Also, the RXT venturi has drilled and tapped bosses for the steering nozzle... the bosses on the RXP venturi are blank because the steering nozzle is attached to the VTS ring.
    Reply With Quote Reply With Quote
  5. 06-20-2008, 08:52 AM #5
    shhr
    shhr is offline
    shhr's Avatar
    Join Date
    May 2005
    Location
    Springfield,TN
    Posts
    2,619
    +1
    345
    Also, the RXT venturi has drilled and tapped bosses for the steering nozzle... the bosses on the RXP venturi are blank because the steering nozzle is attached to the VTS ring
    Jeff you are correct I forgot about that I called Riva when I got mine for the T-X and told them they send the one for a RXP then I was told that is the only one they have now at that time I forgot about the steering nozzle I was willing to deal with blocking off the OPAS plug and hose but I am not going to drill and tap for the steering nozzle I will be calling Riva again as I should not have to drill on a 300 dollar part to make it work
    Reply With Quote Reply With Quote
  6. 06-20-2008, 02:29 PM #6
    speedskixp
    speedskixp is offline
    speedskixp's Avatar
    Join Date
    Feb 2008
    Location
    venice fl.
    Posts
    7,932
    +1
    121
    So if you have an rxp you can use the nozzle from the t just by pluging the opas hole. But if you have a rxt you would need to drill and tap the bosses and the opas hole(if you dont have block offs).
    Reply With Quote Reply With Quote
  7. 06-20-2008, 02:32 PM #7
    05Limited
    05Limited is offline
    Gotta love this sport! 05Limited's Avatar
    Join Date
    Apr 2005
    Location
    Stockton, CA
    Posts
    2,660
    +1
    4
    Correct
    Reply With Quote Reply With Quote
  8. 06-20-2008, 03:22 PM #8
    superduty
    superduty is offline
    THE OFFICAL SUPERDUTY!!!!!! superduty's Avatar
    Join Date
    May 2006
    Location
    Webster, Texas
    Posts
    4,730
    +1
    6
    there is another diff too, the rxp is machined down on the top an bottom and the rxt is not


    trust me my steering nozzzle just broke off cause of this
    Reply With Quote Reply With Quote
  9. 06-20-2008, 05:51 PM #9
    JFizzleJR
    JFizzleJR is offline
    JFizzleJR's Avatar
    Join Date
    Aug 2005
    Location
    FL
    Posts
    8,830
    +1
    965
    Quote Originally Posted by superduty View Post
    there is another diff too, the rxp is machined down on the top an bottom and the rxt is not


    trust me my steering nozzzle just broke off cause of this
    That's what I was looking for.
    I have a RXP steering nozzle and trim ring on the RXT nozzle and I can't turn hard left at speed for some reason. Turning right is ok though. I'm thinking it's differences in the venturi and/or steering nozzle(s).
    Reply With Quote Reply With Quote
  10. 06-20-2008, 09:15 PM #10
    shhr
    shhr is offline
    shhr's Avatar
    Join Date
    May 2005
    Location
    Springfield,TN
    Posts
    2,619
    +1
    345
    Jerry,

    can you help on this Riva needs to offer the one for the RXT not sell us the one for a RXP and tell us it will work. I will need to send mine back as 300 for a part that I need to modify to work is not good
    Reply With Quote Reply With Quote
Page 1 of 2 12 LastLast
« rxt-x grate | Play from the Impeller in the Turbine »

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. 2009 - 2011 OEM Sea Doo RXP X RXT RXP Venturi Nozzle Intake Grate Impeller Intake Etc
    By blakegleason in forum eBay Finds
    Replies: 0
    Last Post: 04-09-2013, 09:32 AM
  2. WTB Steering nozzle from VTS ski (e.g. RXP, RXP-X, RXT-X)
    By mac_man_luke in forum Sea Doo Classifieds
    Replies: 0
    Last Post: 08-27-2011, 09:07 PM
  3. Difference between stock RXP nozzle and RXT nozzle??
    By GPR Ed in forum 4-Tec Performance
    Replies: 2
    Last Post: 04-14-2010, 09:21 PM
  4. RXP X/RXT X 84 mm reduction nozzle kit
    By vxrpete8 in forum Sea Doo Classifieds
    Replies: 10
    Last Post: 08-29-2009, 06:31 PM
  5. WTB RXP or RXT stock Nozzle
    By YAMAPRO in forum Sea Doo Classifieds
    Replies: 4
    Last Post: 04-08-2009, 04:25 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules