F/S RPM 48 mm

[earl]

i have a set of carbs modified by rpm proformance $500.00. ready to bolt on comes with a R&D power pentum . eketring@yahoo.com .

thanks, earl

[OsideBill]

Earl do these fit the GPR? Reason I ask is the power plenum uses the R&D Pro-Loc adapters to mount and the RPM carbs have pressed in bell mouths.

[earl]

Bryan K vbmenu_register("postmenu_", true);

Join Date: Mar 2007
Location: Trinity, FL
Posts: 157


Re: 1390
Earl,

Here is the list he previous owner gave me:
-1390 BB w/wiseco pistons
-ported cylinders
-milled stock head
-stock carbs with RPM mod
-r&d power plenum air filter
-riva d-plate opened .100
-free flow tube
-trued hull!
-the pump shoe has been modified to fit up into the hull
-pump tunnel reinforcement
-fiberglass cloth has been laid underneath the engine for added support
-800 intake grate
-skegless ride plate
-polished stock trims tabs
-note: intake grate, trim tabs, pump shoe, and ride plate all fit flush with the hull
-solas prop
-pump seal kit
-1200 pump
-fuel tank mod
-riva jetrim seat cover

parts as they were described to me by the prevous owner . i will be pulling the carbs after this weekend . will get pics then .

earl __________________
05 GP1400R 80+ MPH, 68 Camaro: 0-145 in 4.9 Seconds
Jim's Performance 727-786-1177
Lowell Horning Porting