Results 1 to 3 of 3
Thread: Limp Mode
-
06-12-2008, 10:30 AM #1
- Join Date
- Aug 2007
- Location
- CT
- Posts
- 2
Limp Mode
So I have a 2000 Ultra 150 which seems to be stuck in limp mode ( it won't go above 3500 rpm's or over 10 mph). So far I have replaced the air temp sensor, water temp sensor, and the fuel level sender switch and it still is in limp mode. If anyone has any ideas of what else could be causing it, please help. Thanks....
-
06-12-2008, 11:02 AM #2
did u do a compression check ??
when was the last time u rebuilt the carbs?
-
06-12-2008, 04:04 PM #3
- Join Date
- Aug 2007
- Location
- CT
- Posts
- 2
I just had the top end redone over the winter, and put brand new carbs on it. Doesn't really seem to be an engine issue, all plugs look good.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Limp mode on a 97 STS.
By ccassone in forum 2-Stroke PerformanceReplies: 2Last Post: 08-29-2009, 07:43 AM -
limp mode solutions/ suggestions on 95 slx
By slxcrazy in forum Polaris How To & FAQsReplies: 14Last Post: 05-06-2007, 10:39 PM -
gas level limp mode ?
By Bone1050 in forum Polaris Open DiscussionReplies: 11Last Post: 03-22-2007, 06:58 PM -
limp mode
By tommy33mac in forum Polaris How To & FAQsReplies: 13Last Post: 03-21-2007, 09:23 PM -
limp mode vs over of fuel
By andy95'slx780 in forum Polaris PWC PerformanceReplies: 1Last Post: 10-02-2006, 04:37 PM
The accelerator position sensor will kill the injectors once it opens a...
2008 FX SHO - No Start - No...