What year GPR?

[supremebeing74]

was just wondering has there been a change in anything with the 1300r's since 04 at all? im looking to buy an gpr and was wondering what year is the best for my $$.. thanks everyone

[Pale Rider]

I believe 2005 and up... fuel injection, HO pump...

[IEGPR]

I have an 06 and it dose not have power valves

[gpr_redneck]

The 05-08 GPR's dont have power valves they also have a High Output pump, and have 170hp compared to 165hp for 03-04 GPR's

all 1300's have fuel injection also

[BlitzK]

The 05-08 GPR's dont have power valves they also have a High Output pump, and have 170hp compared to 165hp for 03-04 GPR's

all 1300's have fuel injection also

Are 1300's required to run 91oct+?

[yami_rida#26]

Are 1300's required to run 91oct+?

stock no..if you go with higher compression you will need to run higher octane yes..

[supremebeing74]

thanks!! love the info

[Inkaddict]

05-08 ... Non power valve, HO pump, The exhaust elbow before the U pipe is different (the 5hp difference) Plastic trim tabs vs metal on the pre 05 gpr's... Im not sure but I think 03-04 gprs were fiberglass and 05 fwd is "smc"

[westy]

03 and 04 are smc also...03 and 04 both have plastic trim tabs too metal trim tabs were pre 2003 from 2000 to 2002 gp1200r's

05-08 ... Non power valve, HO pump, The exhaust elbow before the U pipe is different (the 5hp difference) Plastic trim tabs vs metal on the pre 05 gpr's... Im not sure but I think 03-04 gprs were fiberglass and 05 fwd is "smc"

[BlitzK]

How is the fuel consumption on the 05+ 1300's Vs. an Early XLT 1200?