Results 1 to 4 of 4
-
06-09-2008, 11:57 AM #1
Troubleshooting for running on 2 cylinders
I've tried numerous tests so I'll ask for everyone's input on possibilites. Things to check for things to swap out etc. I have an extra ski that works 100% to use for temporarily swapping things.
Coil packs are good. Getting spark. Injectors are firing. I have to check compression today. Other than that, I'm leaning towards a faulty TOPS valve making it cut out a cylinder. #3 is the one acting up. And so is REID!Last edited by JFizzleJR; 06-09-2008 at 12:33 PM.
-
06-09-2008, 12:02 PM #2
- Join Date
- Jun 2007
- Location
- My House
- Posts
- 4,108
- +1
- 335
probably just the mechanic!!!!!!!!!!!!!!
BET!!!!!!!!!!!!
hahahahahahahahaha
-
06-09-2008, 12:06 PM #3
I would do a compression test and a leak down test.
-
06-09-2008, 05:31 PM #4
Bingo. No compression for cyl. #3. The motor has been bad since day 1 and I finally know why. On top of all that my RXP almost sank today and the motor might have injested water. I won't be attending Mudbug afterall.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
I have a question Is it possible for a bad CPS to cause 4tec to run on one cylinder?
By mrjetskey in forum Sea Doo Open DiscussionReplies: 3Last Post: 08-25-2016, 09:59 AM -
185 hp was running on 2 cylinders
By Tampa Florida in forum 4-Tec PerformanceReplies: 1Last Post: 09-23-2009, 05:44 PM -
657x only running on 1 cylinder. Carb Issue?
By Matt's 175 in forum 2-Stroke PerformanceReplies: 6Last Post: 08-04-2009, 03:06 PM -
Running on one cylinder??!?!
By kidafa in forum 2-Stroke PerformanceReplies: 10Last Post: 05-30-2009, 10:00 PM -
04 RXP running on 1 cylinder
By rokmon in forum Sea Doo Open DiscussionReplies: 8Last Post: 04-02-2008, 07:14 PM
Just an update on the issue with injector wire pins breaking. Had it...
Injector Wire Issues