Results 1 to 3 of 3
-
06-08-2008, 10:25 PM #1
- Join Date
- Jul 2007
- Posts
- 16
Waveraider Carb Swap 38mm to 44mm
I'm looking for some input on jetting specs for some GP1200 44mm carbs that I'm going to install on a stock waveraider 1100. The gp carbs have the chokes removed and F/A's. Should I start with the stock GP jetting or does someone have a more dialed in setup?
-
06-27-2008, 08:44 AM #2
- Join Date
- Jul 2007
- Posts
- 16
-
06-27-2008, 09:06 AM #3
Search for gp carbs on a raider in the old schook section. I posted everything that I have done. It's not as easy as it seems, but it moves
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
97 Challenger 1800 - Carb Swap to non Accel pump?
By rockytop in forum Sea Doo Sport BoatsReplies: 2Last Post: 09-05-2016, 09:24 AM -
how to tell if the carb is 38mm and 44mm???
By andy95'slx780 in forum Yamaha PWC Performance (2-stroke)Replies: 5Last Post: 02-26-2011, 09:28 AM -
Primer Kit And Carb Kit; Where To Buy?
By LakeDog in forum Yamaha PWC Performance (2-stroke)Replies: 3Last Post: 08-16-2008, 09:22 PM -
95 waveraider carb adjustment
By mossiman in forum Yamaha Old School SkisReplies: 4Last Post: 10-15-2007, 06:50 AM -
zxi to stx carb swap?
By Inkaddict in forum Kawasaki How To & FAQsReplies: 3Last Post: 10-08-2007, 08:15 PM
Thank you in advance for any help. I made a promise to the niece that I...
Just can't figure it out.......No...