skat-trak10-21 for RXP?

[novice_4]

have anyone tried this 4 blades prop?, need some advise before buy it!
i just broke my solas14/19 and needed something different!!

how about the performance?? especially for racing

[VFX_Artist]

if you already had a 14/19 solas, then you probably won't want the 10/21 skat~~~ if i remember correctly ~ that pitch prop from skat is just a replacement stock blade... look into their 3 blade props.. pitch?? i don't remember if its the same as the solas (14/19) on the 3 blades. ... comparing a 15/20 solas to a ?? (we bent it many times) 3 blade skat.. i noticed better acceleration with about the same top end (although i didn't do back to back testing.. etc etc.) .... ((( i'm running RIVAs stage 2 kit )))

[Pale Rider]

VFX: Your running a skat 3 blade? which one?...PR...

[novice_4]

VFX :3 blades how about turning? is it hook with the water??

3 blades in rxp ready to install with the same driveshaft??

[HOSS]

Better get a 3 bearing job on a three blade minimum,,,in fact,,,3 blades on a stock pump? too much deflection. These motors make torque and bone stock overpower the pump. Who`s makin a shoe,,,thats all me.

[rxpstan]

If you are racing the stock class I think the bearing mod is illegal.
You don't want to run 3 blade in stock pump.
A 15/20 is too much for a stock motor without a lot of bending.
My guess is 15/21 is for a superstock.

[HOSS]

I run a 15/20 out the box,,,,,,,I think its fawkin awsome,,,love the rooster tail too,,,its all about lookin cool and kickin ace

[jawz]

[quote=HOSS]I run a 15/20 out the box With what nozzle? 88mm? and what RPM? I thought you didn't get your 10 lb wheel? I must not be doing something right! Please show me HOW this is done?

[HOSS]

stock pump, stock charger

[duane]

Stan is right. The Skat-Track bearing mod or any mod is NOT legal for stock class. I was talking to AJ and Cliff in NC about it or just the metal cone to replace the plastic one.
Thanks,
Duane