Impellar damage...

[240witSR]

I slid under my ski today to inspect my wear ring (which is gouged and trashed by the way), and I noticed my impellar looked like someone thought the ski was a tree shredder. The blade has some dull spots and knicks missing on the leading edge only.

I know I should replace with the $25 SBT reman ones, but anyone have one laying around or know a better place to get one?

Also... can i remove the pellar without the special tool? I have alot of cool shiz in my Volvo shop, but I dont want to fight it if I dont need to.

[96XPSS]

You can have yours repaired at Impros, or buy a Solas XO from them. If you get the works he welds the outer diameter and edges back to new specs, applies a brush finish, checks and corrects for proper pitch, then balances.

www.impros.com

[bruinsrme]

Also... can i remove the pellar without the special tool? I have alot of cool shiz in my Volvo shop, but I dont want to fight it if I dont need to.

Would you try to make a tool work on a customers transmission or would you buy the correct tool to do the job?

The prop tool might cost $40 and be assured you will use it more than twice.

[96XPSS]

Prop tools are normally $10, and come with a new impeller. You do need one.

[240witSR]

Yea I saw the tool from SBT for $11 but it comes with a new blade!?

Ill look into buying one from SBT since it is cheap and seems easy enough. They give me a 2 week window to mail my old one back fo a core.

[785xp]

I'll sell you an used XO(good shape), R&D nozzles(85/8, pump wedge and vts trim ring for $350 + shipping. That should help you get your ski up to 60 mph. The XO has a very small inperfection that I can send pictures.

A few of the guys here will vouch for me. I was getting ready to clean out my basement. I also have a new VTS gauge and speedometer. I planned on putting a ton of stuff on Ebay on the weekend if I got time.

[96XPSS]

I'll sell you an used XO(good shape), R&D nozzles(85/8, pump wedge and vts trim ring for $350 + shipping. That should help you get your ski up to 60 mph. The XO has a very small inperfection that I can send pictures.

A few of the guys here will vouch for me. I was getting ready to clean out my basement. I also have a new VTS gauge and speedometer. I planned on putting a ton of stuff on Ebay on the weekend if I got time.

I'll vouch...

[240witSR]

Sounds great but I dont have cash on hand right now... busy fixing everything else wrong with the other ski. Had to order a new flywheel/stator and magneto with my new engine.

[txgp1300r]

http://greenhulk.net/forums/showthread.php?t=59517 Impros work is very good....and the pitch will be exact on all blades

[240witSR]

^ how long does it take? I dont want to lose a weekend.