Results 1 to 7 of 7
-
06-02-2008, 09:26 PM #1
- Join Date
- Jul 2007
- Posts
- 196
Exhaust Pipe/Exhaust Manifold Gasket Install
I have a fully put together ski and forgot to include the gasket that goes between the exhaust pipe and exhaust manifold. How do I install this easily??? I took the 4 large bolts out of the exhaust pipe but it doesn't seem to budge. What am I missing? Is there something else I need to loosen to get that to move?
-
06-02-2008, 09:28 PM #2
maybe a set of holder bolts on the front of the pipe or by the engine mounts
-
06-02-2008, 09:33 PM #3
- Join Date
- Jul 2007
- Posts
- 196
Off topic, but do you know the size of the nuts that secure the cylinder heads on by chance? Mine are all rusted and I don't feel like paying $1.14 on partsland.com for new ones when I can just go to my local hardware store and get some...
-
06-02-2008, 09:43 PM #4
Take on with you. the fancy nuts are cool, but expensive
I believe the y are 12-13mm 1.25 but i am not 100%
-
06-02-2008, 09:46 PM #5
- Join Date
- Jul 2007
- Location
- Cedar Rapids,Iowa
- Posts
- 6,380
- +1
- 23
There is 2 bolts on a bracket in the front of the motor going into the stator cover and 1 bracket under the rear left motor mount on the 750.
Just did that last night too.
-
06-02-2008, 09:48 PM #6
I know it sucks, but a whole lot easier if you pull the gas tank
-
06-02-2008, 09:57 PM #7
- Join Date
- Jul 2007
- Location
- Cedar Rapids,Iowa
- Posts
- 6,380
- +1
- 23
On the 750 it's no problem at all,you can use a rachet on the front and back.15mm socket front,19 on motor mount.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Exhaust Manifold gasket help!
By PolarisPRO1200 in forum Polaris Open DiscussionReplies: 2Last Post: 06-30-2009, 09:40 PM -
WTB: GPR Exhaust Manifold Gasket
By YamahaPat in forum Yamaha ClassifiedsReplies: 1Last Post: 06-22-2009, 02:36 PM -
st. exhaust manifold gasket
By don jordan in forum Yamaha PWC Performance (2-stroke)Replies: 0Last Post: 02-28-2009, 07:06 PM -
Which way is up on the exhaust manifold gasket and threebond ?
By paulgray in forum Kawasaki PWC Performance (4-stroke)Replies: 3Last Post: 08-04-2008, 02:56 AM -
Disaster - Need Guidance (busted exhaust manifold gasket)
By skoots in forum Polaris Open DiscussionReplies: 10Last Post: 07-21-2008, 06:04 PM
so what software did they use candoo?
Anyone hear news of Seadoo being...