FS- Group K sleeper kit, Rossier pipe, novi 42's and more

[pdxrealtor]

Up for sale is my Group K sleeper kit + extras that create a proven pump gas setup. This will work on any 787 including GSX, XP, SPX, GTX.....
Included:
Instructions from Group K and information about assembly ect…
Sleeper ported cylinders. Fresh bore, once over. Brand new OEM pistons- 0 hours Rave valves included, brand new bellows.
GK milled head- no pitting, perfect condition
Rossier pipe with mid pipe jet relocated for easy access. New mid pipe spray bar. New Head pipe spray bar
New, never used water Solenoid
MSD water injection controller
Manifold tapped for EGTs, you can plug the holes if you don’t want to use EGTs.
Included 120 mid pipe jet, and 185 stinger jet.
Microtouch rev limiter
42mm NOVI carbs. You can’t get these anymore. They are modded 40mm I series with A booster bomb site and 42 MM butterflies. These carbs were rebuilt and have 0 hours on them. Not gone through, rebuilt. New N&S, and all the other internal parts that come in the carb kit. They will come jetted with 170 highs and 80 lows, as recommended by Tim from NOVI. If you want diff. jets let me know. Chances are I have them. They also have long T handle HS screws for easy adjustment.

R&D pro lock flame arresters with blue outer wears and support bracket.
Rotary valve cover that has been ported to match the larger 42 mm carbs.
Remote mikuni fuel pump and air fuel separator.
New gasket for manifold to pipe, new rave valve gaskets, new head o rings, new rotary valve o ring, and one set of carb gaskets. We will both need new circlips. You keep your upper rod bearings, as I am keeping mine.
The top end is brand new, only run on the hose.
This is being offered as an exchange. I will need your exhaust manifold, rotary valve cover, carbs, head, cylinder and pistons. NO SCORED PISTONS OR CYLINDERS, must be in good condition. No saltwater junk. You get the point.


Asking $1200.00 Please email me at pdxrealtor@Usa.com It works better than PM.

[pdxrealtor]

bump

[pdxrealtor]

I also have the MT Rev limiter, and I don't need your carbs in the exchange.

[pdxrealtor]

bump

[DamageInc]

bump

I realize it's been seven years since you posted this, but do you have any sweet parts available...?

[pdxrealtor]

bump

I realize it's been seven years since you posted this, but do you have any sweet parts available...?

Funny.... I don't have any PWC stuff left at all. BUT, look up the wayniac. He just called me not too long ago asking about this exact GK sleeper kit. he bought a ton of my parts. So.... he has all the cool stuff now. ... or had it.