Results 1 to 10 of 14
-
06-02-2008, 09:53 AM #1
Wtb: Drive Shaft And Coupler W/housing
Guys,
Please can someone... 2002 GP1200R I need a driveshaft and coupler shaft with housing i.e. all the way from the back of the engine - the whole drive line. May be interestered in complete pump if bearings/prop and seals are good. Or even a later model upgrade
Just stripped down and its not really worth putting back together- Splines are almost gone with mucho backlash.
Cheerz
-
06-02-2008, 09:59 AM #2
- Join Date
- May 2008
- Posts
- 184
- +1
- 1
i have the complete pump assy with prop and drive shaft but do not have the intermediate shaft $175. plus shipping
-
06-02-2008, 10:00 AM #3
You can use an 2002-08 GPR intermediate shaft for yours, but the drive shaft is specific for just that one year. (2002)
-
06-02-2008, 11:28 AM #4
Buckie:
Thanks man. I just gonna wait a day or so to see what other offers appear. But in the meantime ... do you take Paypal ? AND how much for shipping to Miami 33166 ?
WFO:
Yeh man I know the driveshaft is specific for the 2002 year. But if I change out the whole pump and d/s assembly I can use 03-08 GPR right ? and like you said the intermediate shaft and housing are all the same !?
Thanks again guys
-
06-02-2008, 11:53 AM #5
-
06-02-2008, 12:11 PM #6
- Join Date
- May 2008
- Posts
- 184
- +1
- 1
mine might not work its off an 01 sorry
-
06-02-2008, 03:18 PM #7
WFO:
Ok so to recap I can use:-
Only '02 intermediate and d/s with '02 pump together ?
OR
Any intermediate except 02 with 03-08 pump but I will need to extend trim and steering cables ?
OR
00-01 Intermediate with 00-01 pump assy without extending cables ?
If I was gonna go the whole pump route I would prefer to upgrade to the later pump but is it worth it ?
Thanks again man
-
06-02-2008, 03:29 PM #8
-02-08 intermediate w/02 driveshaft
-00-01 intermediate w/any driveshaft except 02
-02-08 intermediate w/2" extension w/longer bolts w/cable extensions w/anydriveshaft except 02
and yes the HO pump is worth it IMO, especially if you add the 2" extension, but you will need a Dynafly prop, depitched for stock application
-
06-02-2008, 08:41 PM #9
-
06-03-2008, 06:39 AM #10
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
SLT 750 Drive shaft and coupler
By Kahl78 in forum Polaris Open DiscussionReplies: 7Last Post: 06-01-2015, 11:20 AM -
WTB NEEDED - Drive shaft and coupler for Polaris SLX 785 PRO
By koryk in forum Polaris ClassifiedsReplies: 2Last Post: 02-20-2011, 12:25 PM -
WTB Intermediate shaft and Bearing housing
By BadinGPR in forum Yamaha PWC Performance (2-stroke)Replies: 0Last Post: 08-11-2009, 04:52 PM -
WTB: Drive Shaft And PTO Shaft GPR
By JohnBoy in forum Yamaha ClassifiedsReplies: 1Last Post: 06-05-2009, 06:19 AM -
WTB '99 GP800 Drive shaft AND Impeller ASAP!
By ProXR 440 in forum Yamaha ClassifiedsReplies: 4Last Post: 07-16-2008, 05:47 PM
Just curious if you did a run at about 1/4 tank of fuel what those numbers...
21 RXPX 300 performance. STAGE II