Results 1 to 6 of 6
Thread: handlebars
-
06-02-2008, 08:00 AM #1
handlebars
I noticed my bars are not straight on the T-X. I order to go in a straight line I need to turn the bars slightly to the left. How do I fix this?
THANK YOU!
-
06-02-2008, 08:17 AM #2
There is a lock nut on the steering cable that you can loosen to either spin the end peice in or out to get it straight. it is pretty easy. just turn the nozzle in the rear from side to side and you will see which cable it is.
-
06-02-2008, 08:18 AM #3
-
06-02-2008, 08:29 AM #4
Yes. The cable connects to the nozzle in the rear. You will need a 10mm socket and also a 10mm wrench to remove the connecting bolt. and the lock nut on the cable itself is 11mm. after removing the connection bolt and loosening the nut, you will be able to spin the end piece to make the adjustment.
-
06-02-2008, 08:55 AM #5
-
06-02-2008, 02:16 PM #6
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
UMI Finger Throttle on Stock Handlebars
By 1FastTrespiper in forum Sea Doo How To & FAQsReplies: 10Last Post: 05-30-2011, 03:49 AM -
anyone have any close up pics of handlebar extensions??
By psycho rxp in forum 4-Tec PerformanceReplies: 9Last Post: 02-06-2006, 07:07 PM -
UMI Handlebar question for Jerry.
By ccassone in forum Sea Doo Open DiscussionReplies: 18Last Post: 12-02-2005, 10:08 AM -
Handlebar Extensions & OEM cover fitment
By Shibby1485 in forum 4-Tec PerformanceReplies: 15Last Post: 10-31-2005, 08:35 PM -
Riser Handlebar kits for RXP?
By Jeff C in forum 4-Tec PerformanceReplies: 1Last Post: 05-19-2005, 04:26 PM
I asked this in another thread. What markings show on the head that it's...
SVHO Engine Failure