Results 1 to 10 of 30
Thread: Gibson For The X Model's
-
05-29-2008, 07:57 PM #1
Gibson For The X Model's
I Have Been Racking My Brains To Find A Solution To Adapt The Two. The Most Cost Affective Way To Do It Would Be To Purchase A Jpipe. For Me To Make A "watertrap Jpipe" It Would Cost Around 400 Or So. Way To Much. It's Cheaper To Buy A Used Jpipe. With That Said I Will Be Testing This Weekend.
-
05-29-2008, 08:01 PM #2
Your ears must be burning Jason. All we need to know is that the J pipe will not change engine performance. I personally do not think so, as i compared the X streight pipe in diameter to the j pipe and the X pipe is only a hair bigger.
Also will be good once you confirm that J pipe with gibson will fit with stock ic location on X. That is unless we get a relocation setup to move the intanglement.
Have fun testing.Last edited by skoepp; 05-29-2008 at 08:09 PM.
-
05-29-2008, 08:04 PM #3
- Join Date
- Jun 2007
- Location
- My House
- Posts
- 4,108
- +1
- 335
thats all i had intended on doing
.......already bought my j-pipe for it
........no reason it shouldnt bolt right in with a j pipe directly off the exhaust manifold! good luck!
-
05-29-2008, 08:22 PM #4
And Just So We Are All On The Same Page I Am Building A Intercooler Relocation Kit, Just Waiting On Tube And It Will Be Up In The Store. Not Sure On The Price But Will Have To Wait And See.
-
05-29-2008, 09:10 PM #5
-
05-30-2008, 07:04 AM #6
-
05-30-2008, 07:42 AM #7
Already have the J-pipe in hand waitin on the Gibson and the outlet kit from the store
-
05-30-2008, 10:21 PM #8
-
05-31-2008, 01:19 AM #9
- Join Date
- Jan 2006
- Location
- Rydal, Georgia U S A
- Posts
- 3,920
- +1
- 15
Does more exhaust noise make them go faster?
-
05-31-2008, 05:08 AM #10
- Join Date
- Jul 2007
- Location
- hawkesbury ontario
- Posts
- 127
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
SOLD both side chrome pieces used no rust for the FX model $70 shipped
By mikegp in forum Yamaha ClassifiedsReplies: 2Last Post: 09-25-2016, 02:48 PM -
Any ideas as to gauge mounts for the iS models?
By oikonomoupetros in forum 4-Tec PerformanceReplies: 4Last Post: 05-02-2015, 02:03 AM -
1165cc '1200' Ficht engines, different power ratings for the same model year?
By K447 in forum Polaris Open DiscussionReplies: 6Last Post: 07-29-2008, 12:26 PM -
New R&D supercharger impeller for the x models
By charger in forum 4-Tec PerformanceReplies: 0Last Post: 05-08-2008, 07:10 AM -
RXP seat cowling for the X model?
By rx4pain in forum Sea Doo Open DiscussionReplies: 22Last Post: 01-21-2008, 09:55 AM
https://www.easyrider.store/product/rs-3325-friction-washer-large/...
135 or 142 charger