Results 1 to 4 of 4
-
05-27-2008, 04:41 AM #1
- Join Date
- Mar 2008
- Posts
- 2
GP1300R not performing from mid to high
I've got a GP1300R not getting speed, only 12mph at w.o.t.
The ski initial 5mins can get up to 40 to 50mph but still dun have the oomps! feeling, after 5 mins it only gets 12mph, engines firing doesn't sound nice. just can't pick up speed.
Checked all 3 spark plugs - ok
Checked n change all injector - ok
checked fuel pump and cleaned them - ok
checked exhaust pipe - ok
The only thing left uncheck is the CDI.
Anyone have the same problem? Can the gurus advise!
Many thanks in advance
-
05-27-2008, 05:27 AM #2
Have you checked your compression on all 3 cylinders i don t like when you say its not firing right.
Also it could be the Cat Convertor replace it with a RIVA D Plate.
-
05-27-2008, 05:37 AM #3
-
05-27-2008, 08:19 PM #4
- Join Date
- Mar 2008
- Posts
- 2
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Surges From Low To High Power; 2005 RXT
By browan in forum 4-Tec PerformanceReplies: 10Last Post: 07-01-2013, 08:38 AM -
MSX 140 - sputtering power loss at mid to high range
By DrWeaseL in forum MSX/MatrixReplies: 45Last Post: 04-07-2010, 10:53 PM -
getting the rxp to mid to high 70s on a budget
By spence in forum 4-Tec PerformanceReplies: 8Last Post: 10-01-2008, 05:44 PM -
GP1300R Bored EFI from 40 mm to 42mm
By kevski in forum Yamaha PWC Performance (2-stroke)Replies: 7Last Post: 12-12-2006, 12:35 AM -
2003 GP1300R Not Running To Well
By lacfiremx02 in forum Yamaha PWC Performance (2-stroke)Replies: 3Last Post: 08-17-2006, 10:34 AM
If it has a d plate installed on it than you need to make a “chip” for...
1300R, exhaust beeping.