Results 1 to 10 of 48
Thread: 15/22rr Will It Work?
-
05-26-2008, 04:40 PM #1
- Join Date
- Jun 2006
- Location
- Highland lake , CT
- Posts
- 161
15/22rr Will It Work?
From 05/to the 08 pumps are thier any changes?? want to try 15/22 rr on a stage III , all ready running 3 blade skat 15/19 tweeked at 80 mph ,any one try this???? Been thinking about this one ?? dealers help /NO INFO???
-
05-26-2008, 04:42 PM #2
The 15/22 will fit your pump no problem. Most people see a higher top speed with the 4 blades vs the 3 blade you are currently using. Not a lot of testing yet on the new 15/22 but i suspect it will work well for you.
-
05-26-2008, 04:46 PM #3
I was woundering this too...Im currently running a stage 2+ with a 15/19 running between 77-78 MPH..Was woundering how a 15/22 would preform on this..I know the pump tunnels are differant BUT HP is close between the X and a stage 2 RXP....HHHMMMM.
-
05-26-2008, 04:47 PM #4
With 300+ out there I'm hoping someone will have those test results soon.
-
05-26-2008, 04:51 PM #5
-
05-26-2008, 04:58 PM #6
Well I installed mine in my stage 2+ B-Kit RXT
before I was running a 15/19 3 blade tweaked by Jerry best top end was 73.2
then I installed a 15/20 +1mm got a best of 73.3 but on the limiter need to add 1 more and test
then I added the 15/22 just off the trailer with 4 bars of fuel I ran a 74.5at 8000
but my R`s started dropping to 7800 after about a 30 minutes of riding
I am getting another 15/22 for my 05 as i think once I get it to run 8000-8100 it will be 74+ all day with stock ECU
I was surprized it added 1.2 mph I was hoping for .5
-
05-26-2008, 05:00 PM #7
Shhr.
How is the hole shot????Did you lose anything??gain anything??or is it the same???
-
05-26-2008, 05:00 PM #8
- Join Date
- Jun 2006
- Location
- Highland lake , CT
- Posts
- 161
Thanks Jerry
-
05-26-2008, 05:02 PM #9
- Join Date
- Jun 2006
- Location
- Highland lake , CT
- Posts
- 161
-
05-26-2008, 05:04 PM #10
well for holeshot I can tell you that nothing beats the 3 blade
but it is real hard to really know other than feel I think the increase in topend so far is worth a little less holeshot
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Will it work??
By rlovebk in forum Polaris Open DiscussionReplies: 1Last Post: 10-04-2008, 01:17 AM -
08 X ECU on a 07? Will it work?
By Water4fire in forum 4-Tec PerformanceReplies: 10Last Post: 07-17-2008, 09:24 AM -
Skat 15.5/22.5 3 blade impeller on an RXP-X... Will it work???
By t_hoang02 in forum 4-Tec PerformanceReplies: 11Last Post: 07-04-2008, 11:57 AM -
700 Stinger on a 1200 will it work?
By TimAtkinson in forum Polaris Open DiscussionReplies: 0Last Post: 06-13-2008, 12:43 PM -
144mm-155mm pump conversion-will it work?
By Mongoose in forum Yamaha Old School SkisReplies: 6Last Post: 10-21-2007, 05:18 AM
I cannot comment further as to what DashPac can or cannot do on newer...
Motec Seadoo Price Drop