Ebay IC pipes

[rxpblast]

Has anyone made their own IC pipes for the ebay IC for the rxp? i have the IC but i need to get some pipes made. Hoss i think ur planning on making them but im not patient . if anyone has made them and wants to sell some let me know or if u know the measurments that would be good as well! thanks Justin

[Kinchyle]

I jused used silicone connectors with SS joiners and then ordered polished aluminum piping off ebay

siliconintakes.com

If you have to make a 90 bend use a 3" cobra fitting. you can get off ebay too

[HOSS]

If your gonna use silicone 90`s and 45`s,,give me the lengths and what ID you want and I`ll send them to you. I throw more scrap away per day that`ll work in straight lengths.

[Water4fire]

Hoss have any pipe I can use to replace my wifes stock resonater? Anyway I can get ya to flare it???

[HOSS]

Whats the length and ID? Send me a PM. If not mistaken they are like 4" long. Got plenty of that!

[Yuji]

I think they are 7-8" long...at least on my jet boat it was.

[Lurker]

8.5" long 2.25" ID

[Water4fire]

Hoss I am not real sure as I just installed a PPG Power pipe on my ski, but I figure for the wifes RXp a pipe replaceing the resonater is OK...
Don't want her faster than me.

[HOSS]

8.5 long from 2 1/4 id? Do you need any fittings? I`ll send the pipe out for free. PM me your info,,,monday or tuesday it`ll be USPS

[Kinchyle]

Hoss I am not real sure as I just installed a PPG Power pipe on my ski, but I figure for the wifes RXp a pipe replaceing the resonater is OK...
Don't want her faster than me.

go to siliconeintakes.com and get a 2.5 SS joiner.
That is what I am using and it doesn't bounce around the hull.
Get 2 x2.5 T-Bolt fittings to clamp off.