Results 1 to 10 of 27
-
05-25-2008, 04:27 PM #1
- Join Date
- Mar 2008
- Posts
- 52
stage 3 kit 04 rxp wont spin no more than 6800 help
help i just put a stage 3 kit and jims ride plate and a rude regulater and it wont spin any more than 6800 and 5.5 pounds of boost i dont know what is wron the plugs are brand new i have 60pounds of feul when i start it up and have 50lb injectors maybe bad ecu or coil what does every body think i need help it rev out of the water on the trailer up to 7k so i dont know why it wont do it when it gets in the water.
-
05-25-2008, 04:44 PM #2
- Join Date
- Apr 2005
- Location
- Jax,FL
- Posts
- 2,643
- +1
- 25
PRACTICE KEY MODE? S.C. IMPELLER SPINNING ON SHAFT,BIG BOOST LEAK, S.C. CLUTCH PROBLEM
-
05-25-2008, 06:16 PM #3
prob a bad coil pack. 6800 is usually a sign of that
-
05-25-2008, 06:27 PM #4
Do you have the knock sensor update harness installed? If not it needs to be.
This is the location of your knock sensor connector. The update harness will be a short pigtail harness that plugs between your stock wire harness and the knock sensor connector. It's about 8" long.
Other things i would look for are a boost leak. Check the BOV and all your plumbing connections.
-
05-26-2008, 03:01 PM #5
- Join Date
- Mar 2008
- Posts
- 52
i pulled it out of the water and ran it it revs to like 8600 or where ever the rev lib is but it does make any boost on the hose jerry let me know what u think i need to figure this out makes me mad all that money riva claims bolt on
-
05-26-2008, 03:10 PM #6
- Join Date
- Aug 2005
- Location
- Jerry's guest bedroom
- Posts
- 3,469
- +1
- 2
So if I understand you correctly, without a load on the pump it revs to the limiter and makes plenty of boost. In the water it is a dog. Sounds like a prop problem.
-
05-26-2008, 03:14 PM #7
- Join Date
- Aug 2005
- Location
- Jerry's guest bedroom
- Posts
- 3,469
- +1
- 2
Edited post, I read his RPM's wrong. Thought he said 6800 out of the water. nmaD aixelsyd.
Last edited by NCHeel; 05-26-2008 at 03:16 PM.
-
05-26-2008, 03:15 PM #8
don't blame it on Riva dude! Plenty of people run this kit with no issues.
You will not make boost running it on the hose. The ski has to be on the water and under a load.
Did you take my advice in the above post and look to see if your ski has been updated with the knock sensor update?
-
05-26-2008, 03:17 PM #9
- Join Date
- Mar 2008
- Posts
- 52
the boost gauges doesnt register boost out of the water only vac maybe i got a bogis riva stage 3 prop
-
05-26-2008, 03:21 PM #10
- Join Date
- Aug 2005
- Location
- Jerry's guest bedroom
- Posts
- 3,469
- +1
- 2
Jerry's probably right. Knock sensor update harness is not installed.
Last edited by Green Hulk; 05-26-2008 at 03:24 PM.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Is riva stage one kit on rxp really worth it ?
By rxp91 in forum 4-Tec PerformanceReplies: 2Last Post: 07-26-2010, 10:18 PM -
Is riva stage one kit on rxp really worth it ?
By rxp91 in forum 4-Tec PerformanceReplies: 0Last Post: 07-26-2010, 05:18 PM -
Help 04 Rxp wont start
By region8racer in forum Sea Doo Open DiscussionReplies: 1Last Post: 07-17-2009, 11:40 PM -
Help 04 Rxp wont start
By region8racer in forum 4-Tec PerformanceReplies: 4Last Post: 07-13-2009, 04:52 PM -
stage 1 kit for rxp
By monsoonmadness in forum Sea Doo ClassifiedsReplies: 4Last Post: 07-14-2008, 07:52 AM
I would still try another set of plugs first. Cheap way to check. If the...
RXT tops out at 7600rpm