Results 1 to 4 of 4
  1. #1

    Join Date
    May 2008
    Clermont, (Orlando) Florida

    Dead 2002 XLT800 - No power to gauges

    I have a strange thing happening on my 2002 XLT800. When I put the key on, I get nothing on the gauges. The start button does nothing. If I press the mode button, the display reads start. I can lock and unlock the ski by entering the code, so that is not the problem. I checked the resistance in the key switch, the start button, and the stop button and all check ok. Any ideas. A dealer told me it is a bad cluster, but I want to be sure before I buy one. That leads me to my next question. Anyone have a set for sale?


  2. #2
    If your not doing something, its hard to screw up. stlouisramsfan's Avatar
    Join Date
    Jul 2007
    Pontoon Beach Illinois
    What about a bad starter relay?
    post a "WTB" in the classifieds...
    check on ebay, there is always one on there...

  3. #3
    When you press the start button it should say "START", even with a bad relay. You did check both of the fuses, right?

    Open the CDI box and jump the start switch wires (I don't know which one they are, off the top of my head).

    You can also jump the starter relay while pressing the start button and see if it fires.

  4. #4
    Moderator OsideBill's Avatar
    Join Date
    Mar 2006
    United States
    Get a meter on the relay and see if you get power to it when you hit the start button, this will tell you if the relay is bad.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. STX 15F No power to the Fuel Pump
    By stxnewbi in forum Kawasaki PWC Performance (4-stroke)
    Replies: 1
    Last Post: 09-26-2010, 08:38 AM
  2. Polaris slth no power to MFD
    By rounder9 in forum Polaris Open Discussion
    Replies: 15
    Last Post: 03-08-2010, 01:40 PM
  3. 06 RXP Died....NO Power to startup
    By pjr170 in forum 4-Tec Performance
    Replies: 1
    Last Post: 08-10-2009, 08:48 AM
  4. No power to #1 cylinder.
    By Jetscreamer in forum Yamaha PWC Performance (2-stroke)
    Replies: 8
    Last Post: 08-12-2008, 08:23 AM
  5. no power to the coils, 96 xp
    By snoopy'sbitch in forum 2-Stroke Performance
    Replies: 8
    Last Post: 08-06-2008, 06:05 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts