Special offer for those that have purchased R&D X grate or intend to buy one

[Green Hulk]

If you have previously purchased an R&D X model intake grate you can now purchase their X model Power Plenum Filter Kit at half price
http://www.4-tecperformance.com/inde...roducts_id=875

This offer only applies to those that have purchased the grate previously or if you purchase one now you can also purchase the Power Plenum now at the promotional price.

This offer is good until the end of June

[meeper]

where does this mount, R&D has a huge lack of details

Jerry, please add R&D part number 333-80155 to the store also, this is the new ticket!!

[shhr]

how about 50% off on the grate

[Green Hulk]

where does this mount, R&D has a huge lack of details

Jerry, please add R&D part number 333-80155 to the store also, this is the new ticket!!

Part 333-80155 will be available in 2.5 weeks.

Here are some pics of the plenum filter


Pic 1) OEM X stock plenum box with restrictive shroud cover.

Pic 2) Prototype filter installed onto Oem plenum box

Pic 3) OEM X stock plenum box with restrictive shroud cover removed.

[gba]

wouldnt it benefit you more to just make your own custom 4 inch intake?

[MPower]

How does air enter the system with that OEM shroud?

[Green Hulk]

wouldnt it benefit you more to just make your own custom 4 inch intake?

Well, the X model is a different animal than the 215's we're used to. The new X model intake tube is a very good design, unlike the old RXP. It just needs the restriction at the end removed so replacing the inlet with the R&D filter really helps out.

[gba]

Jerry once the restrictive shroud cover is removed do you know what size that hole is? I might try it and see what happens.

[Green Hulk]

I don't know the size. Once you remove the shroud you will be able to measure it.

[lextoy]

that price is actually good for a filter that size.
i think the new X SC has a larger intake port, to move alot more air, 4"????
so the X model air intake must have been modified. now to get the most out of it i bet you need a 5" kanaflex with reducing coupler , and a monster 5" filter...
might be impossible to properly squeeze something that big into the ski anymore, necessitating a simple filter bolting to the existing airbox like this.