Results 1 to 10 of 10
-
06-19-2006, 06:29 PM #1
Somone check for me: Will Solas cone fit stock prop?
trying to get 01xdime up and running for saturday for the AWA DC ride... i sent him my prop, he's switching to RXT/P driveshaft/pump setup on his GTX SC... so he's got my stock prop and everything else is on order...
my stock impeller boot got destroyed... and Josh doesn't have an impeller boot to put on the prop i sent him. i have an extra SOLAS nose cone... will that thread onto the stock prop, or are those SOLAS "specific" threads?
-
06-19-2006, 06:47 PM #2
Yes, Compwhiz had one on my new RXP.
.
-
06-19-2006, 06:48 PM #3
-
06-19-2006, 06:49 PM #4
thanks Austin
wasn't sure bc the threads on the stock cone are kinda flexible being rubber and all, didn't know if there was a slight variation in the threads from stock to SOLAS and i don't have a stock prop to try it on.
thanks again
STEVE
-
06-19-2006, 06:50 PM #5
Originally Posted by Vman
-
06-19-2006, 06:58 PM #6
Ok- I'm just gonna bring the whole pump assy. from my '05 with the Solas down to DC- just in case. I'll bring my stock prop and nose cone too.
-
06-19-2006, 07:02 PM #7
u got the prop, cone, housing covered...
i'll bring an extra motor and supercharger
ya might as well bring that extra hull with u, no?
-
06-19-2006, 07:07 PM #8
If you've got an extra motor and supercharger we can put it in the hull before we go...
-
06-19-2006, 07:11 PM #9
na... we're better off riding RELIABLE machines
-
06-19-2006, 09:11 PM #10
You 2 are nuts...We are gonna have a blast Saturday...If he doesnt get it working We can just bring a tube and pull him up to DC....
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Looking for a used 08 RXP-X stock prop.
By Rxpx guy in forum 4-Tec PerformanceReplies: 0Last Post: 06-27-2011, 09:18 PM -
Quick question.. solas YD-SC-XO prop for yamaha 1100 fit 97 gp1200?
By jcc011185 in forum Yamaha Old School SkisReplies: 21Last Post: 07-06-2007, 09:16 AM -
MudBug will have to wait another year for me.
By OsideBill in forum Yamaha Open DiscussionReplies: 42Last Post: 06-06-2007, 09:27 PM -
please check your Sc`er for me...
By Pale Rider in forum 4-Tec PerformanceReplies: 39Last Post: 05-14-2007, 04:33 PM -
Could someone check this on their RXP for me please...
By RXP-REX in forum Sea Doo Open DiscussionReplies: 5Last Post: 04-23-2007, 10:05 PM
It definitely can if the primer port is below the throttle plate. Mount...
Kawasaki 1100 ZXI Won't Start...