Results 1 to 10 of 15
Thread: Catch can mounting location?
-
05-12-2008, 12:00 PM #1
Catch can mounting location?
I think I want to buy a catch can. Looking at the pictures, it looks like the catch can mounts somewhere by the exhaust manifold on the 2004 RXP? Are there holes there or do you have to drill and tap them out? How hard is installation?
-
05-12-2008, 12:07 PM #2
- Join Date
- Jun 2007
- Location
- My House
- Posts
- 4,108
- +1
- 335
the catch can is held by the 2 bolts in the very end closest to the front of your ski on the exhaust manifold.........remove those two bolts and add the bracket then tighten them back up......cut down and then add the hose from the breather to the catch can.........make sure if u have the stock air intake that u plug the hole u leave in the air intake tube when u remove the hose from the breather to the air intake tube.....good luck!
-
05-12-2008, 12:11 PM #3
-
05-12-2008, 12:18 PM #4
- Join Date
- Jun 2007
- Location
- My House
- Posts
- 4,108
- +1
- 335
yes the two end bolts that hold the exhaust manifold..its easy enough but i didnt time it.....as well look at your catch can and familiarize yourself with which way is closed and open because u cant read it after its in and u really cant even see where u drain it...u just put a cup under the thing and turn the arm to empty it......good luck Friend!
-
05-12-2008, 03:10 PM #5
Thanks, looks like I will be ordering one.
-
05-14-2008, 10:50 PM #6
Don't mean to hijack the thread but I installed catch cans on my N/A engines. I noticed the other day when I was out on the lake that some very minor smoke was coming out of the filters. Is this normal?
-
05-14-2008, 10:58 PM #7
- Join Date
- Jan 2006
- Location
- Rydal, Georgia U S A
- Posts
- 3,920
- +1
- 15
It's funny.... I've only had blowby when my engine was sick? My 06 and 08 have had no blowby or leakage out of the hose. Must just be lucky
-
05-14-2008, 11:09 PM #8
i hav noticed to that i get smoke from the top, help????
-
05-15-2008, 10:11 AM #9
-
05-15-2008, 10:40 AM #10
- Join Date
- Jul 2006
- Location
- Ft.Lauderdale
- Posts
- 3,200
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Suspension ski catch can mounting location
By BEECHFRONT in forum 4-Tec PerformanceReplies: 4Last Post: 06-12-2015, 08:51 AM -
catch can location
By GreenMonster in forum Sea Doo Open DiscussionReplies: 11Last Post: 12-17-2011, 03:26 PM -
Fizzle catch can install location 05 RXT
By GreenMonster in forum 4-Tec PerformanceReplies: 6Last Post: 09-19-2011, 10:54 AM -
2010 and up VX DIY catch can and mount
By TXVXrider in forum Yamaha PWC Performance (4-stroke)Replies: 5Last Post: 01-31-2011, 08:43 PM -
kanaflex install... where to mount voltage regulator? and catch can?
By bblades262 in forum 4-Tec PerformanceReplies: 11Last Post: 04-08-2010, 03:31 PM
Looking for some guidance. I searched the whole country for a Black and...
2022 FX Cruiser Enable Factory...