Finally got it dialed in!!!

[Turbo Nick]

Ive got it running good finally. Broke down and brought the reduction nozzle. Put the 81mm ring in and ran 78.1 mph. Boost was 9.8 psi. Im finally satisfied w/ the speed im gettin w/ my mods

[Dark_viper42]

Ive got it running good finally. Broke down and brought the reduction nozzle. Put the 81mm ring in and ran 78.1 mph. Boost was 9.8 psi. Im finally satisfied w/ the speed im gettin w/ my mods

Good numbers!

[JeffTurbo601]

Very Nice=d>

[Turbo Nick]

Been messing around w/ it for a couple a weeks. Thought I would be able to do it w/ out the reduction nozzle. But it has poved to be a worth while investment.

[gold rxp]

What were your speeds before the nozzle? Do you know what the change is rpm's will be by putting a 82mm in?

[Vern]

Congrats! Nice numbers!

[Green Hulk]

Ive got it running good finally. Broke down and brought the reduction nozzle. Put the 81mm ring in and ran 78.1 mph. Boost was 9.8 psi. Im finally satisfied w/ the speed im gettin w/ my mods

Congrats on your speeds. It's amazing what that 81mm nozzle will do for you.

[Turbo Nick]

What were your speeds before the nozzle? Do you know what the change is rpm's will be by putting a 82mm in?

Befor they where 76 mph at 8200+. Tried adding 2mm o pitch w/ minimal results. Then took 1mm out so I still have 1mm in and added 81mm ring and presto 78 mph. I think the 82 mm will raise the engine rpms and slow me down. Is this right?

[Dark_viper42]

I would imagine you would gain ~60 RPM. Don't know how it would affect your speed, but everyone swears by the 81mm. I'm running an 80mm right now, wonder what that will do to the speed?

[gold rxp]

I have almost the same setup, except I do not have greenwater box, block offs and no rear air.I have a 3 inch filter setup. I was running 76.9 @8200 best.
installed nozzle with 81 mm ring now I am running 77.5@8120 best.
just thinking if rear air will make a difference and what gains to expect.
Also wondering if 80mm ring will increase speed?