anybody in the DFW area please read

[soldierpage]

hey i was wondering if there is anybody around the dallas area that will be wiling to help me remove my supercharger to send to jerry thanks i currently live about 15 minutes east of mesquite

[800AMSOIL4U]

Check with WFO Rich. I am not sure how close he is to you.

[superduty]

wfo is about 5 hrs from him, you would have better luck with ride all day or maybe he can tell you were to take it around there

[RIDEALLDAY]

I've actually never had to pull one. I need to pull my 06 SC though.
I really don't want to start on someone elses.
Call Kawasaki City in Lancaster, 972-228-3772. They might be busy being the beginning of the season. They are a very reasonable dealer.

[soldierpage]

i got a local shop that told me 150 for the pull and install of washers u think thats a good deal?

[bruinsrme]

Its probably 2 hours of labor which seems to be fair in my eyes.

[RX951]

I would not trust a dealer to install the washers. Let 4-tec performance (Jerry Gaddis) install it. It is really easy to remove. If you are basically mechanically inclined, you can do it. trust me, its easy. I never worked on an RXP until I bought one for my wife last year. As soon as the ski got in my garage, [never been in the water] I had the SC out in 15 minutes.

Also check with forum member Jarrett. He is in your area also.

Here is the link to remove it


http://greenhulk.net/forums/showthre...e+supercharger

[bruinsrme]

Ok I am about mechanically inclined as a dead frog on the side of the road.
I was able to remove my SC and install the rude in about an hour.
$150 isn't too bad if you have a trustworthy dealer.
But doing it yourself is rewarding.
scott

[RIDEALLDAY]

i got a local shop that told me 150 for the pull and install of washers u think thats a good deal?

That's fair, not a good deal, but saves shipping and down time.
I will say Jerry has done alot more than any dealer and has it down.
Which dealer, if you don't mind.
BTW, I'm in Dallas, so I know most of them.

[meirvin]

Im either in N Richland Hills or South Arlington off of I-20 at Green Oaks..got the tools and can show you how. might take 30 mins