oil catch can kit?

[CarFanatic]

I'd like to do a catch can on my new rxp once breakn is done. IS there a kit for this, or is it just buy any catch can?

[SplishSplash]

Lots of people here run catch cans but I checked mine this weekend and after 40 hrs of running there is Zero oil in the intake or SC. The input of the SC is spotless and the inside of the Riva intake is dry and clean.
So what Im saying, is of you don't have blow by, why bother.
Now if you do, yes, get a catch can.
Question is, why do some skis have oil in the intake and other don't? I have no clue.

[Green Hulk]

http://greenhulk.net/?p=53

[Kinchyle]

http://www.greenhulk.net/forum/viewt...ighlight=catch

You can get the kit at lowes for under $20

[Kinchyle]

I got to 50plus hours then got one of these (attached). It would be nasty if I dumped that on my SC and IC.

Notice my overflow hole on the can(brown from spilling through). That is so it doesn't back up into my crankcase hose. Then the oil/gas will just go into the hull.

[Fast-XPL]

http://greenhulk.net/?p=53

Jerry, I just called Jazz and asked about their catch cans. The guy sounded like I was a nut.

Do you have a part number? Is it a 1 pint "breather"? Also, what do they cost?

[Water4fire]

http://greenhulk.net/?p=53

Jerry, I just called Jazz and asked about their catch cans. The guy sounded like I was a nut.

Do you have a part number? Is it a 1 pint "breather"? Also, what do they cost?

John you are a NUT!!!! :P :P


I need to order one aswell.

[Fast-XPL]

http://greenhulk.net/?p=53

Jerry, I just called Jazz and asked about their catch cans. The guy sounded like I was a nut.

Do you have a part number? Is it a 1 pint "breather"? Also, what do they cost?

John you are a NUT!!!! :P :P


I need to order one aswell.

Thanks Austin. That's the nicest thing I've been called all day

[Sirhc7897]

I know several on here have gone with the smaller catch can (1 pint) and modified it to accept the 3/4" hose.

I took a different route and ordered their 1qt version which already has a 12an fitting and the 3/4" line slides right on (with a little convincing). Of course the downside is mounting locations require just a little more though as it's a few more inches diameter and 2" taller...

I ended up mounting it in my front storage bucket.

[Green Hulk]

Its their 1 pint mini breather

http://www.jazproducts.com/index2.htm