Results 1 to 10 of 18
Thread: Stock RXP RPM?
-
05-31-2006, 03:38 PM #1
- Join Date
- Jul 2005
- Location
- Val-d'Or, Quebec, Canada
- Posts
- 56
Stock RXP RPM?
What should the RPM be on a stock RXP?
I ask because i can barely go over 7800 on almost flat water.
I have 13 hours on mine.
I know the oil level can make a difference, last year it was between the mark, this year its a little high (i had some remove today).
Should i be worried?
-
05-31-2006, 03:59 PM #2
What are your conditions - i.e. air temp, water temp, humidity? Heat robs you of RPM. Also, check your wear ring. Damage to it can cause decreased RPM. 7800 in the summer is not out of the ordinary.
-
05-31-2006, 04:04 PM #3
Best RPM's would be in the 8,000-8,100 area.........
-
05-31-2006, 05:51 PM #4
Originally Posted by Jeff C
-
05-31-2006, 05:52 PM #5
I have the same amount of hours on my 05 and it stops at 7800....i'm pretty sure the ecu is doing it....havnt had 10 hour yet....shops backed up....i'll see what happends after that.
-
05-31-2006, 06:00 PM #6
Originally Posted by wakeborder556
-
05-31-2006, 06:42 PM #7
i
ive seen 8300 just reving it up during flushing and 8150 easy on smooth water...
-
05-31-2006, 08:49 PM #8
- Join Date
- Jul 2005
- Location
- Val-d'Or, Quebec, Canada
- Posts
- 56
excuse me, but what is a wear ring? could it be the culprit even at 13hours?
-
05-31-2006, 08:59 PM #9
Re: i
Originally Posted by meeper
Nah not wear ring....I've been riding in a clean lake and havnt started it near shore..i swim it out to way past where i cant touch. It pulls real hard up to 7800 and then just stops thats why i think its ecu. Its like its pegged there. Micky what year you got bro?
-
06-01-2006, 07:30 AM #10
- Join Date
- Jul 2005
- Location
- Val-d'Or, Quebec, Canada
- Posts
- 56
i have same as you, its a 2005.
my friend also have a 2005, ill have to check with him to see if he can go past that...
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
RXP-X - Bone stock speed / RPM concerns
By RMcElarney in forum 4-Tec PerformanceReplies: 11Last Post: 07-12-2010, 05:16 PM -
What should RPMs be for a stock RXP-X?
By Jarrett in forum 4-Tec PerformanceReplies: 8Last Post: 07-23-2009, 09:30 AM -
bone stock rxp, rpm and speed question?
By Brueskerxp06 in forum 4-Tec PerformanceReplies: 8Last Post: 06-13-2007, 09:27 AM -
stock 06 sea doo rxp RPM gauge shows 8360
By XRIDER in forum Sea Doo Open DiscussionReplies: 9Last Post: 01-27-2007, 05:41 PM -
Stock 05 RXP RPM`s
By Big Red Monster in forum 4-Tec PerformanceReplies: 2Last Post: 06-07-2006, 10:34 AM
I just read an article that FX are finally showing up in Australia. Hope...
Anyone still waiting on 2022...