Results 1 to 10 of 22
Thread: Thru hull Exhaust?
-
04-18-2006, 07:02 PM #1
Thru hull Exhaust?
I know that every one has said that it does not do much for performance....But how is the sound at idle or at WOT???
I have heard Green Hulks sound clip on the trailer but can ya hear it when it is in the water????
I kinda want to get one and who makes the best??
Thanks in advance for the help....
-
04-18-2006, 07:16 PM #2
I have the Riva thru-hull one and sounds great. Not as loud as a GPR with a free-flow, but not as quite as the stock RXP sound.
Hope that helps.
-
04-18-2006, 09:01 PM #3
Originally Posted by ramnj
-
04-18-2006, 10:13 PM #4
- Join Date
- Feb 2006
- Posts
- 155
It actually does sound nice. I'm not a fan of the ricer sound either, but something about 7-8k revs, just makes it better.
At idle, you can hear it gurggling in the water. Just before plaining you can hear it resonating off the water coming from the back of the hull. It would get annoying if it stayed in that position for a while, but why would you?
I would do it again if I had the chance to do it over.
-
04-19-2006, 05:31 AM #5
I have the RR exhaust. Paid a little more for metal. You can hear it gurgle at idle, not much louder than stock. My friend thinks it sounds wicked on pass by's
It's about like putting a good flowmaster on your tow vehicle. Nice low tone, not too loud.
-
04-19-2006, 05:42 AM #6
I was out on the water the other day and my GF told me that my Ski was much louder than the others, But it sounded really Meaty.
It is quite loud, quite a lot louder than stock, but its a great sound.
-
04-19-2006, 12:04 PM #7
- Join Date
- Apr 2006
- Location
- mn
- Posts
- 48
i heard its neccisary to get a opas removal kit to install it. is this true
-
04-19-2006, 12:16 PM #8
Yes. You need to ditch the OPAS for the thru-hull.
-
04-19-2006, 12:22 PM #9
If you want to keep your OPAS you can then install the freeflow tube. Your ski will sound just like it would with the thru-hull.
-
04-19-2006, 02:05 PM #10
Naaa I Need to get rid of the OPAS It left a nice mark on my head last summer when it caught a wave ......That will go also ....Where can I find Gpr Exhaust...???
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Thru hull exhaust
By Kinchyle in forum 4-Tec PerformanceReplies: 8Last Post: 09-19-2005, 08:26 PM -
Riva thru hull exhaust---2 7/8 Hole saw ---- Loctite 5910
By RXPDAVID in forum 4-Tec PerformanceReplies: 4Last Post: 08-03-2005, 05:05 PM -
Riva thru hull exhaust / PPG power pipe
By RXPDAVID in forum 4-Tec PerformanceReplies: 5Last Post: 07-10-2005, 11:19 AM -
Riva Thru Hull Exhaust ** VIDEO ATTACHED**
By Green Hulk in forum 4-Tec PerformanceReplies: 46Last Post: 06-30-2005, 10:03 PM -
Riva's Thru hull exhaust!
By Compwhiz82 in forum 4-Tec PerformanceReplies: 21Last Post: 06-25-2005, 11:08 AM
I have a 2010 GTX155 with IBR intermittent issues. I would like to disable...
deactivate IBR, is it possible.