Results 1 to 10 of 12
Thread: Black Dangly Bits
-
04-12-2006, 12:53 PM #1
Black Dangly Bits
Getting my ski ready for it's first outing this year. (Actually only it's 2nd outing since buying during the winter).
Happen to look up through the grate to the impeller and noticed some a dangly black bit of what looks like seal. Also noted that the seal on the left of the grate looks all sort of, out of line.
Is that something to worry about, or will it be fine?
-
04-12-2006, 12:59 PM #2
- Join Date
- Oct 2005
- Location
- Ann Arbor, MI
- Posts
- 1,439
it looks like its just an over flow of silicone you will be fine...It will all go bye bye after a couple of rides!
-
04-12-2006, 01:51 PM #3
yup, just the silicone oozing out when it was applied/cured...PR...
-
04-12-2006, 01:53 PM #4
- Join Date
- Oct 2005
- Location
- Ann Arbor, MI
- Posts
- 1,439
PR...Is that rust on his Drive shaft??
-
04-12-2006, 01:55 PM #5
Originally Posted by Totallyblown
-
04-12-2006, 01:58 PM #6
- Join Date
- Oct 2005
- Location
- Ann Arbor, MI
- Posts
- 1,439
oooic...
-
04-12-2006, 02:08 PM #7
Thanks for the reassurance, is it worth trying to cut it off, or you reckon just leave it?
As for the rust... My old ski had that as well. It's used 100% in the sea, and although I always flush well after EVERY use, I guess there's always gonna bit the odd mineral left.
Good idea to try and remove the rust or just leave it?
-
04-12-2006, 02:09 PM #8
That is Seadoo's idea of "fit and finish"
Trim all the loose stuff out of there. Trim back the crap that sticks out and can cause turbulence.......
-
04-12-2006, 02:14 PM #9
Turbulence? With an avatar like that Jeff C?
-
04-12-2006, 02:34 PM #10
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Black and gold GPR saying hello (ps , looking for a bit of holeshot)
By duudu in forum Yamaha PWC Performance (2-stroke)Replies: 14Last Post: 05-28-2012, 03:07 AM -
hey hulk, info on the paint used for ski (green to black)
By mxl16 in forum 4-Tec PerformanceReplies: 11Last Post: 07-14-2006, 07:11 PM -
a bit of a weird problem, can I have opinions please???
By rxp_boy in forum 4-Tec PerformanceReplies: 9Last Post: 11-15-2005, 01:39 PM -
Riva Exhaust Outlet... Polished Billet or Black?
By Shibby1485 in forum 4-Tec PerformanceReplies: 8Last Post: 10-24-2005, 10:46 PM -
Finally bit the bullet..bought first mod,and "the list&
By Shibby1485 in forum 4-Tec PerformanceReplies: 10Last Post: 10-12-2005, 11:33 AM
My clutch went out yesterday at 50 Hours, new 2021 Style Clutch, OEM Wheel...
Any one have issue with new style...