How about a Solas 15/20R for my mods...?

[GeoRXT]

Frank is selling me one he has for a good deal and while I trust his expertise I wanted to hear more opinions on the matter. It is a Solas 15/20R I believe.

Besides the mods in my signature I will add the Vortec S/C impeller and the Riva intake grate. And if Jerry puts out the skegs for the RXT I will defiantely buy that too for sure!

So....inputs?

[Green Hulk]

Geo, you are a long way off from needing a 15/20. Try and find a 14/19.

[GeoRXT]

Geo, you are a long way off from needing a 15/20. Try and find a 14/19.

So a 14/19 will do for the mods listed and the ones I will get. After what I mentioned here I dont think I will get anything else.

[GTXX]

just some food for thought, on the 951's some people got better performance taking some pitch out of the leading of a Solas Concorde 15/20 than starting out with a 14/19.

[supermac]

Id say the opposite, the best performing 15/20s on the 951 I've seen had more pitch on the leading edge!

[4rsnow]

i had 13/17 on with the same mod you have on and was turning about 7900rpm at 67 mph even after i install the riva i.c. could only turn the 13/19, 15/20 was to big.

[GeoRXT]

There are so many different opinios I think I'll hold off on it cuz I dont wat to throw $250+ down the drain right now.

[HOSS]

Wanna know what I`d do? Wait for the 3 blade Jerry`s workin` on with dial in now. Thats what I`m doin.

[GPR/STX-15F/RXT]

There are so many different opinios I think I'll hold off on it cuz I dont wat to throw $250+ down the drain right now.

Hey boricua, i already told you which solas prop was the best for your ski, if by any reason you didn't get the message in english language i can do it again in our primary language spanish....

Ask, how many moded stage II RXT'S out there can SMOKE a stage II RXP in smooth water with a R/R ECU spinning a solas 14/19R prop @ 8400 peak rpm's, WELL I DID IT!!!!!!

[GTXX]

Id say the opposite, the best performing 15/20s on the 951 I've seen had more pitch on the leading edge!

yeah, my 15/20 worked better after I bent up the leading edge, stopped it from blowing it out from a dead stop. But some need smaller than a 15/20 and had better results starting out with a 15/20 than a 14/19.