Results 1 to 10 of 48
-
04-02-2006, 09:58 AM #1
- Join Date
- Oct 2005
- Location
- Ann Arbor, MI
- Posts
- 1,439
Max Amps pulled from Batt question!!!
I was just trying to figure out how many external amps can be pulled from the batt and charging system (i.e. Bilge Pumps, Bilge Blowers, ect...).
I have a Rule Fully auto Bilge Pump, and going to have a Det-mar Bilge Blower (3" type) and basically I was wondering if that would harm the charging system or rectafier by those two things pulling to much power...
The bilge Pump comes on ever 2.5 minutes and the fan would be continuous.
Engine will be running
Fan used for circulation of hull.
So what does everyone think??
-
04-02-2006, 10:01 AM #2
Totally: remember to specify wether you are running these momentary or continuous. engine running or not, and what your using the blowers for: ie continous circulation or forced air indution for air intake, or simply to evac fumes upon start up?...
Note* 4-Tec engine: 3 phase delta wound stator, capacity is 360 Watts @ 6000 RPM`s.
Magneto is the primary source of electrical energy - the purpose of the charging system is to keep the battery at a full state of charge.
...PR...
-
04-03-2006, 08:36 AM #3
http://www.electricalconnection.com/...icators/bm.htm
I have the universal version of this installed. It's on the right side of my lanyard connection.
If it turns yellow I know my battery needs some charging and not to turn it off....
-
04-03-2006, 09:12 AM #4
- Join Date
- Oct 2005
- Location
- Ann Arbor, MI
- Posts
- 1,439
Kinchyle,
What all do you have running off of your batt??
-
04-03-2006, 10:23 AM #5
Originally Posted by Totallyblown
, and a shortwave/laser planetary radio to contact MARS to see if anyone has the need for JB weld outside of our solar system!
...PR...
-
04-03-2006, 11:53 AM #6
- Join Date
- Oct 2005
- Location
- Ann Arbor, MI
- Posts
- 1,439
lol...
-
04-03-2006, 12:03 PM #7
this place just wouldn't be the same without ya Kinch
-
04-03-2006, 12:07 PM #8
- Join Date
- Oct 2005
- Location
- Ann Arbor, MI
- Posts
- 1,439
Nope...it wouldnt!
-
04-03-2006, 12:11 PM #9
Originally Posted by Totallyblown
...
where the humor!...PR...
-
04-03-2006, 12:14 PM #10
- Join Date
- Oct 2005
- Location
- Ann Arbor, MI
- Posts
- 1,439
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
2005 RXT - Max Amps for Accessories?
By Midd1994 in forum 4-Tec PerformanceReplies: 0Last Post: 07-06-2012, 01:09 PM -
Noise from pump Question ?
By elviswongg in forum Kawasaki Open DiscussionReplies: 2Last Post: 06-30-2009, 05:34 PM -
RXP ENGINE PULL~~A couple questions
By David_HX_RXP in forum Sea Doo Open DiscussionReplies: 7Last Post: 06-18-2008, 11:00 PM -
Yet another problem!!!! pump removal from hull question
By spyder3000gtvr4 in forum Yamaha Open DiscussionReplies: 14Last Post: 09-20-2007, 03:07 PM -
Funny Noise from RXP Question...
By meeper in forum 4-Tec PerformanceReplies: 21Last Post: 11-29-2006, 04:45 AM
Yes, spend $50 and put in a new one..
Bad dess port or bad ground maybe...