Results 1 to 3 of 3
  1. #1

    Inner Hull And Tub Reinforcement Part1 Help Please

    So Now That the rxp is right side up I began the outline to the part that I need to cut out of the inner hull.

    Sure Sure, You've seen people on their jetskis. But have you seen anyone in there jetskis?

    Anyways you see in the pics the purple outline and then cut.

    And then I tried to use a hair dryer to loosen up the bond between the feet of the inner hull and the outer hull. WONT BUDGE!

    What do I do now? Hey jawz are you around?

    Anybody else do this before? I made a hole in the center towards the front of the section that I cut out. Heated up the feet and used a cherry picker to try to lift the section out and a piece small 1/2 piece of fiber glass flew out and I got pegged with the chain that was on the hoist OUCH son of a beyatch...

    Any advice guys?
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	DSCN1000.jpg 
Views:	57 
Size:	501.4 KB 
ID:	38105   Click image for larger version. 

Name:	DSCN1017.jpg 
Views:	71 
Size:	444.4 KB 
ID:	38106   Click image for larger version. 

Name:	DSCN1019.jpg 
Views:	60 
Size:	500.3 KB 
ID:	38109   Click image for larger version. 

Name:	DSCN1029.jpg 
Views:	54 
Size:	517.7 KB 
ID:	38111  
    Last edited by yellow4; 09-09-2007 at 10:36 PM.

  2. #2

    Join Date
    Jan 2006
    Rydal, Georgia U S A
    first you cut out too big a hole. But anyway, pry it one side then another. The dimples are where its glued to the external hull. If you have to use a hole saw in the dimples with a short bit in the center.

    I cut right behind the dimples so I could pry it loose or put a chisel between them. Good luck

  3. #3
    Thanks jawz. I just used rudedogs pics for reference to get the size of the cut out. I think the idea of cutting just behind the dimples may be the best way. I can't get any leverage and I tried prying left and right like you said but still no luck.

    Do you think I need a heat gun instead of a hair dryer to really heat up those dimpled areas? I don't want to catch the fiberglass on fire.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. 1200 virage stator output and cdi output voltage Help please
    By Rhagerman in forum Polaris Open Discussion
    Replies: 2
    Last Post: 05-28-2016, 08:23 PM
  2. 07 Ultra LX and 07 STX-12F Help please.
    By BigBoyRXP in forum Kawasaki PWC Performance (4-stroke)
    Replies: 4
    Last Post: 05-29-2012, 04:40 PM
  3. I'im new and i need your help please
    By Bflynfree in forum Polaris Open Discussion
    Replies: 8
    Last Post: 05-16-2012, 09:48 PM
  4. 96 HX Oil Leaking Into Hull And Kind Find Leak PLease Help........
    By shkdwn387 in forum 2-Stroke Performance
    Replies: 2
    Last Post: 05-16-2011, 03:40 PM
  5. Replies: 1
    Last Post: 06-05-2010, 09:17 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts