Rotax Racing cam gear help!!!??

[psycho rxp]

I'm trying to figure out why the gears are different, and how this gear goes on to the stock cam?....or is it only supposed to go on the RR cam? NEED SOME HELP HERE please. The stock gear has 1503 with the 2 lines lined up flush with the head,and the cam trigger at the bottom of the gear. The RR cam gear has those same #'s , and lines at the bottom of the gear, and are right next to the cam trigger. WTF??????? Which way should I put the RR gear?

[Green Hulk]

take a close up pic of your cam gear and post it here

[psycho rxp]

hold on one sec, and I'll load it in my comp.

[Green Hulk]

running to taco bell.... brb

[psycho rxp]

here's the two gears Note the position of the cam trigger, and the lines marked 1503

[Green Hulk]

hmmm, looking at your pic and the pic from my online store it seems you are missing the timing marks???

[psycho rxp]

Yup, unless It's only supposed to go on the RR cam....maybe its clocked differently??? If I spin the motor over 180, and try to lock the cam the 1503 lines would be right, but the trigger would be 180 from where it is now Does that matter? Not sure here. Has anyone done this on a stock cam??

[psycho rxp]

Looks like I need the one from your top pic. They are different ones. also.....whats the difference...year maybe? 06'?

[Green Hulk]

No, shouldnt be any difference. I think you just got an improperly machined one? Shoot Mark an email and see what he says.

[psycho rxp]

will do