Results 1 to 10 of 59
-
03-17-2006, 04:39 PM #1
UPDATED: results of Les B kit and RR ECU on Shibbs ski
2005 RXT
Last time out 3 days ago:
Mods were 14/18.5 Solas, Pump wedge, NOPAS, thru-hull exhaust
71.2 mph @ 8100 rpms
TODAY: RUN #1
14/18.5 Solas, pump wedge, NOPAS, thru-hull, new flash RR ECU, Les B kit
72.5 mph @ 8300 rpms
TODAY: RUN #2
15/20 out of the box, pump wedge, NOPAS, thru-hull, new RR ECU, Les B kit
73.2 mph @ 8050-8100 rpms
still have to install external IC as all these runs are with the STOCK seadoo intercooler.. i'm done for the day
-
03-17-2006, 04:41 PM #2
theres not much of a diff there shibby! is that what u expected or is something wrong?
-
03-17-2006, 04:42 PM #3
Re: RESULTS of Les B kit and RR ECU on Shibbs ski
Originally Posted by Shibby1485
-
03-17-2006, 04:43 PM #4
What were the temps in the 2nd run ?
I thought you want 8400 with the ECU. Should you need to prop down ?
-
03-17-2006, 04:44 PM #5
shib, the 15/20 with 1-2 mm taken out of the trailing edge will bring you 74+ at 8400 RPM's
gotta tweak the prop to be able to sling it at 8400 though
-
03-17-2006, 04:49 PM #6
what about acceleration on the two test runs.
I wouldn't care if my top speed was only 60mph if I could get there in 1.2 seconds.
-
03-17-2006, 04:51 PM #7
He is going to break 75 when he gets the Ebay IC finished
-
03-17-2006, 05:26 PM #8
- Join Date
- Jul 2005
- Location
- Powhatan, VA
- Posts
- 281
-
03-17-2006, 05:35 PM #9
- Join Date
- Jun 2005
- Location
- NY
- Posts
- 359
Originally Posted by GTXDIck
-
03-17-2006, 05:41 PM #10
- Join Date
- Feb 2006
- Location
- michigan
- Posts
- 4
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
A/F and RPM Numbers on S3 Ski with Nico or Les Cook Reflash
By eric1238 in forum 4-Tec PerformanceReplies: 0Last Post: 04-22-2011, 06:07 AM -
Pictures of Riva intercooler and new ECU on display
By Green Hulk in forum Yamaha PWC Performance (4-stroke)Replies: 106Last Post: 12-14-2009, 06:37 PM -
ran the ET 137 wheel with 42s and RR ECU
By dhoad in forum Sea Doo Open DiscussionReplies: 3Last Post: 10-11-2008, 08:40 PM -
GTX SC w/B Kit and Reflashed ECU
By Red Devil in forum 4-Tec PerformanceReplies: 29Last Post: 03-17-2006, 09:48 PM -
Results of Stage I Kit from Race Tech
By Red Devil in forum 4-Tec PerformanceReplies: 12Last Post: 06-18-2005, 06:54 PM
My driveshaft support bearing is leaking. Looks like I have pull the motor...
What's involved is replacing the...