Skat Trac 3 blade

[111toybox]

I got my prop today but it came with no cone, Is it supposed to.

Thanks

[wakeborder556]

call and ask

[Green Hulk]

Skat props come with no cone

[Mark S]

I got my pump back from Skat with the 3-blade and they shipped a stainless cone with it at my request. They put the green cone from the Solas impeller on the Skat impeller. It seems you can use the stock cone or Solas cone on the Skat impeller.

[Pale Rider]

I also got my pump back with the mods and a 16\21 swirl prop with no caone, so I just put a new seal/boot on it...PR...

[111toybox]

My solas cone would not screw in.

[Green Hulk]

It should screw in just fine. Remember, its left hand threads.

[daverxp4]

I also got my pump back with the mods and a 16\21 swirl prop with no caone, so I just put a new seal/boot on it...PR...

when you say seal/boot you mean the original cone right? thats what i did with my solas prop.

[111toybox]

It screws in solas fine. I put good presure on it to.

Thanks

[Green Hulk]

Thats strange because i have solas nose cones in my Skat 3 blade props. This is for the RXP though.