Results 1 to 3 of 3
Thread: Rebuilt STX No Power
-
08-08-2007, 07:31 AM #1
- Join Date
- Jul 2007
- Posts
- 3
Rebuilt STX No Power
I just put a new top end in a 99 STX 1100. Went to water test it last night and it was topping out at 27mph. Ran it for about 60 seconds and the engine was hot. Anyone have any direction for me to go from here? Compression is fine.
-
08-08-2007, 11:37 AM #2
Have you checked the timing? What were the rpms at 27 mph?
-
08-09-2007, 03:14 PM #3
- Join Date
- Feb 2007
- Posts
- 47
- +1
- 2
sounds like there is no water going through the engine check your hoses and check the sensor on the pisser pipe
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
98 kawasaki 750 stx no power AFTER 30 MIN
By gp1200rider in forum Kawasaki PWC Performance (2-stroke)Replies: 5Last Post: 07-29-2014, 08:53 AM -
900 STX - No power to start button
By Siouxcitysmitty in forum Kawasaki PWC Performance (2-stroke)Replies: 14Last Post: 05-09-2014, 10:01 PM -
2000 stx 1100 d.i. ***no power***
By koryk in forum Kawasaki PWC Performance (2-stroke)Replies: 18Last Post: 04-30-2010, 12:30 AM -
97 xp, rebuilt now no power
By diesel04 in forum 2-Stroke PerformanceReplies: 11Last Post: 06-27-2009, 10:57 AM -
no power on STX 1100
By chiefmoose in forum Kawasaki Open DiscussionReplies: 3Last Post: 08-08-2008, 10:56 PM
Well i replaced the ECU, and no changes. Still won't pulse the injectors....
2008 FX SHO - No Start - No...