Results 1 to 5 of 5
Thread: impeller wrench
-
08-02-2007, 10:58 PM #1
- Join Date
- Apr 2007
- Location
- ANTIOCH , CA
- Posts
- 31
impeller wrench
do i need two wrenches one to remove oem and one to install solas i have not purchashed anything yet
-
08-03-2007, 09:54 AM #2
- Join Date
- Jul 2007
- Location
- fontana ,ca
- Posts
- 69
no, the same too for removal is the one for installation.
-
08-03-2007, 11:25 AM #3
but, you are going to need a 12mm allen head on the opposited side of the impeller (under the cone).....and probably a 3ft breaker bar. I use a peice of galvanized pipe from the hardware store.
-
08-03-2007, 11:50 AM #4
- Join Date
- Apr 2007
- Location
- ANTIOCH , CA
- Posts
- 31
So The Impeller Wrench I Can Buy At 4tecperformance For An Rxp Is What I Need To Remove And Install Thanks For Input
-
08-03-2007, 12:21 PM #5
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
New impeller but do I have to buy the Impeller Wrenches And Impeller Seals?
By lost_dogg in forum 4-Tec PerformanceReplies: 3Last Post: 07-15-2013, 02:51 PM -
where to get 12mm allen wrench for impeller removal
By fcs1965 in forum 4-Tec PerformanceReplies: 10Last Post: 03-12-2009, 07:08 PM -
Help identifying impeller and finding an impeller wrench.
By vintagevalves in forum Yamaha PWC Performance (2-stroke)Replies: 6Last Post: 08-25-2007, 06:39 PM -
Correct Impeller wrench
By GTI06 in forum 4-Tec PerformanceReplies: 2Last Post: 08-03-2007, 11:21 PM -
Impeller Wrench tool Part Number...HELP
By majundecid in forum 4-Tec PerformanceReplies: 2Last Post: 08-08-2006, 06:22 PM
Another question mates , may I stay with closed loop and keep my Rotax...
Turbo Project with low boost 18-19...