Results 1 to 5 of 5
Thread: Oversize piston
-
07-30-2007, 06:59 PM #1
Oversize piston
i wanna bore my 1300 cylinders...where can i buy oversize pistons rings, the entire set r sold separatlly?
-
07-30-2007, 09:03 PM #2
Are you talking about boring and replating? you can't just bore them like the older sleeved cylinders.
-
07-31-2007, 09:51 PM #3
-
07-31-2007, 10:50 PM #4
i want to bore my cylinders. ..i want to bore my 1300 cylinders to an extent that i dont have to use race fuel...only thign is im not usin fuel injection im using carberators....what kind of rejjetin would i have to buy to get them rejjeted for the bore that you recommend. and i have a pair of riva racing head i would liek to put on wen i bore. i had on the 1300 cylinders on my xl1200 lld which i bought from a friend but it time to go faster
. the carbs are rejjeted for the 1300 cylinders.
-
07-31-2007, 11:06 PM #5
Here is some good reading.... and they will sell you pistons, rings, ect...
http://groupk.com/y1390.htm
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
WTB: Oversized Pistons
By boostaholic in forum Sea Doo ClassifiedsReplies: 0Last Post: 03-01-2009, 12:27 PM -
Oversize pistons and machining slx780
By desertmariner in forum Polaris Open DiscussionReplies: 3Last Post: 01-03-2009, 12:12 PM -
Oversize Pistons RXP
By Brad Clarke in forum 4-Tec PerformanceReplies: 1Last Post: 09-10-2008, 11:37 PM -
1.00mm oversize piston with oem head ??
By klze in forum Polaris How To & FAQsReplies: 5Last Post: 06-19-2008, 10:27 PM -
Mixing OEM sized pistons with oversized pistons
By vanlohd in forum Polaris Open DiscussionReplies: 10Last Post: 05-20-2007, 10:50 PM
What octane does the owners manual recommend for your supercharged engine?...
Gasoline - any speed difference?