Results 1 to 8 of 8
Thread: Extra Motot Mount Holes???
-
07-30-2007, 05:26 PM #1
- Join Date
- Apr 2007
- Location
- JUST NORTH OF CUBA-- FL,KEYS
- Posts
- 2,871
- +1
- 137
Ok Anybody Put Tripples In A Cane???
What Are These Holes For A Bigger Motor?
IF SO I THINK I FOUND A PROJECTLast edited by KEYZBUM; 07-30-2007 at 07:00 PM. Reason: CONFIRM MY NEXT PROJECT
-
07-30-2007, 06:53 PM #2
- Join Date
- Aug 2006
- Location
- Homer Glen Il.
- Posts
- 8,777
- +1
- 123
yes for a tripple motor
-
07-30-2007, 08:54 PM #3
-
07-31-2007, 12:24 AM #4
- Join Date
- Jul 2007
- Location
- Central, Alaska
- Posts
- 35
Man that thing is freakin awsome!
-
07-31-2007, 10:53 AM #5
Those mount brackets are for a 1450 stroker engine only .Make sure you use this combination .See Richie
Cheers
Bernie
-
07-31-2007, 12:31 PM #6
- Join Date
- Aug 2006
- Location
- Pittsfield, MA
- Posts
- 3,352
- +1
- 26
Now that would be sweet! I think a 1050 or 1200 will fit those mounts. I'm not sure about a Fuji. I did some measuring and guesstimating. It looks like you would have to lose the oil injection or make up a custom tank if you really want to keep the oil injection. If you have a 96 I'd definitely track down the drive shaft update kit.
-
07-31-2007, 12:37 PM #7
785 with pipes???? You know the one Bob is sending
-
07-31-2007, 09:50 PM #8
- Join Date
- Aug 2006
- Location
- Pittsfield, MA
- Posts
- 3,352
- +1
- 26
I'm pretty good with power tools. How much do you think would have to be hacked out to fit triple pipes.? Maybe I should see how Redlines twins look in there. I'd be amazed if there is room for one more pipe. They were talking single pipe on the 1450 weren't they?
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
two holes underneath the jet pump from mounting the steering?
By Un-cowJ in forum Sea Doo Open DiscussionReplies: 2Last Post: 02-26-2014, 08:56 PM -
Question water box mod (Extra hole inside)
By elviswongg in forum Kawasaki PWC Performance (4-stroke)Replies: 5Last Post: 05-22-2009, 05:32 PM -
opening up and extra hole on the cowling what is the negative of doing that?
By noshowallgo in forum Yamaha PWC Performance (2-stroke)Replies: 6Last Post: 11-01-2008, 06:49 PM -
Extra Motor mount hole anyone??
By earthshaker in forum Kawasaki PWC Performance (4-stroke)Replies: 12Last Post: 06-20-2007, 11:00 PM -
Pump Mounting Hole Spacing
By 05Limited in forum Sea Doo Open DiscussionReplies: 3Last Post: 12-16-2006, 06:11 PM
I noticed it was smoking a lot at idle so I pulled the exhaust off to look...
Gp1300 oil pump stuck at full