Results 1 to 3 of 3
-
07-30-2007, 04:35 PM #1
- Join Date
- Jul 2007
- Posts
- 9
A few questions on pro 785 topend
Hi, my 785 recently blew up and im looking to get some input on new pistons as far as brands and what to use?, I'm also going to need some new jugs or get mine bored. Are these cylinders nikasel(sp?). How far can you bore them safely. And where do I get pistons, maybe im not seaching good enough but it seems like there aren't too many to be found. Thanks,
Ryan
-
07-30-2007, 04:44 PM #2
OEM for the pistons. You can use 750 pistons they are the same bore but have a different ring design. The 785 rings are a tombstone design and the 750 has standard ring design. Yes the cylinders are plated.
-
07-30-2007, 05:09 PM #3
- Join Date
- Aug 2006
- Location
- Homer Glen Il.
- Posts
- 8,777
- +1
- 123
you can send your cylinders to Millenium Technologies in Wisconsin it's like 220.00 a cylinder to get redone
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
780 base gasket work on Pro 785 ?
By sloan_william@msn.com in forum Polaris Open DiscussionReplies: 0Last Post: 01-10-2014, 12:21 PM -
Pre Filters on Pro 785 ?
By sloan_william@msn.com in forum Polaris Open DiscussionReplies: 2Last Post: 03-13-2012, 09:38 PM -
UMI vs Vilder Steering on Pro 785
By bigred70 in forum Polaris Open DiscussionReplies: 3Last Post: 12-22-2010, 11:22 PM -
Few questions on my slx after the first few times out.
By ryanbgb22 in forum Polaris Open DiscussionReplies: 7Last Post: 05-23-2010, 09:31 AM -
Water cooling lines on pro 785
By 1998PRO785HO in forum Polaris How To & FAQsReplies: 7Last Post: 06-15-2008, 03:02 PM
Just tried with the hotter plug today, no change at all. But I think the...
Yamaha FX Cruiser 2005 (FX140),...