Results 1 to 10 of 11
Thread: Hmmmmmm
-
07-21-2007, 10:07 PM #1
Hmmmmmm
Went out today. The ski was running fine. Pinned @ 8100 solid. Suddenly dropped to 6550 and speedo wouldn't read over 62 mph
Any guesses on what happened?
-
07-21-2007, 10:12 PM #2
-
07-21-2007, 10:13 PM #3
Over 1400 posts...I know you have something else going on
-
07-21-2007, 10:19 PM #4
muffler bearing went south, should have replaced them with ceramic high performance, this will teach you!
-
07-21-2007, 10:58 PM #5
-
07-21-2007, 11:29 PM #6
your guess doesn't count. you were the one that helped put it together in the parking lot
-
07-21-2007, 11:33 PM #7
- Join Date
- Aug 2005
- Location
- Jerry's guest bedroom
- Posts
- 3,469
- +1
- 2
Guess you found that boost leak.
-
07-21-2007, 11:38 PM #8
Lol no. This was changing from 2.5" to 3". The 3" pipes didn't really want to fit.
-
07-22-2007, 02:36 PM #9
- Join Date
- May 2005
- Location
- cape coral florida
- Posts
- 250
3" pipes don't fit in there?
-
07-22-2007, 02:49 PM #10
They do fit but the one pipe was about 1" short and I can't start over now. So it came out because of the intercooler moving. I'm going to put worm drive clamps on it instead of t-bolt, maybe try a hump hose..The original setup worked but came un-done twice. It really depends on the angles you choose and the length of the pipe that you put in. The pipe that came out was something like 10" or something..The clamp needed a little bit more of the pipe to grab onto.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
HMMMMMM
By Mpeavler in forum Yamaha Old School SkisReplies: 101Last Post: 05-12-2010, 05:17 PM -
HMMMMMM.....
By WFO in forum Yamaha Open DiscussionReplies: 8Last Post: 12-03-2005, 11:33 PM
Check the camshaft timing marks with the crank at tdc compression#1, make...
Help, 2019 fx svho stage 2 with...