Results 1 to 3 of 3
Thread: low speed adjuster
-
07-20-2007, 08:57 PM #1
- Join Date
- Dec 2006
- Location
- johnstown pa
- Posts
- 146
low speed adjuster
can not get my ski to run good,did compression check 115psi on all three[valves closed-108 valves opened]
,seams to be running very rich,plugs very wet,just kinda boags when giving it gas.[even on trailer],should i try to adjust my t- handels?mainly the low side?
2000 gpr 1200r
1300 jugs and stock head
pre mix
carbon tech reeds
d-plate and chip
primer kit[no accel pump and plates gone]
t-handels and fresh rebuild
-
07-25-2007, 06:55 PM #2
Hello sic fish, If you are idling and it starts loading up and you smell a lot of raw fuel take your lows and turn them in about a 1/4 turn and try it. For the highs do a wide open run and shut it down instantly pull plugs and check for color. If you have any questions give me a ring any time. Thank you, Jim
-
07-25-2007, 07:17 PM #3
- Join Date
- Dec 2006
- Location
- johnstown pa
- Posts
- 146
thanks jim going to give it a try
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Factory carb setting for high/low speed adjustment.
By jchale in forum Yamaha Old School SkisReplies: 4Last Post: 04-28-2011, 03:39 PM -
question abotu low speed adjusters on 03 gp800r
By 98gsxl951 in forum Yamaha Open DiscussionReplies: 1Last Post: 05-26-2010, 07:07 AM -
low speed adjuster location?
By Rampage in forum 2-Stroke PerformanceReplies: 2Last Post: 06-18-2009, 08:09 PM -
Low Speed Adjusters - T-Handles
By YamahaPat in forum Yamaha ClassifiedsReplies: 2Last Post: 03-24-2009, 11:08 AM -
Initial carb tuning... and low speed adjusters
By pdxrealtor in forum Sea Doo ClassifiedsReplies: 14Last Post: 04-29-2008, 08:05 AM
My clutch went out yesterday at 50 Hours, new 2021 Style Clutch, OEM Wheel...
Any one have issue with new style...