Results 1 to 10 of 15
-
05-26-2005, 07:22 PM #1
- Join Date
- May 2005
- Location
- St. Louis MO
- Posts
- 441
What should stock RPM be running?
My 05 RXP the max i can get it up too is 7850! Is this about right? Also I have a little bit of white smoke coming out of the back when its idling or going slow 5-10mph is this normal to see?
-
05-26-2005, 07:23 PM #2
you should be seeing 8000-8100 RPM's. Having the engine over filled with oil will scrub off RPM's. I bet you are overfilled as you are smoking
-
05-26-2005, 08:08 PM #3
I only seen 7650 when mine was stock. After the Riva intake i was up to 8100.
-
05-26-2005, 08:17 PM #4
yea, not all skis see the same RPM's due to varrying circumstances. Ideally the higher the better
-
05-26-2005, 11:25 PM #5
- Join Date
- May 2005
- Location
- St. Louis MO
- Posts
- 441
Well I just past the 10 hr mark and had it at WOT for about 15 sec and only reached 7850 rpm. By the way it has smoke just a little since I have brought my machine 3 weeks ago!
Any body else running 7800-8000 rpm range stock or is it just me!
It was also 86 degrees today
-
05-27-2005, 06:47 AM #6
- Join Date
- Apr 2005
- Location
- Logan Township, NJ
- Posts
- 280
RPM's
My 05 RXP is only turning 7850. Once in while for a split second I see 7900. I basically have a PPG stage 1 setup. I will need to have my impeller repitched. That should get me back up. But I also saw 7850 when the ski was all stock. I am really believeing that the dealer overfilled the oil a little. I just did my oil change and have not been on the water. I will see this weekend.
Peter
-
05-27-2005, 07:03 AM #7
In the Dallas area in the summer, 7850 was a fairly usual number for the RXPs I've seen. In the cooler air it gets up to 8000-8100.
-
05-27-2005, 07:08 AM #8
- Join Date
- Apr 2005
- Location
- Oklahoma City Oklahoma
- Posts
- 43
Mine does about 7800 to 7950 depending on weather conditions! I did notice a loss of power and speed last sunday when temp. hit 100 deg. So seems it will vary with altitude and weather cond. big
-
05-27-2005, 07:08 AM #9
Same here in Waco Jarrett.I have been seeing 8100 all spring.The last time I went out I could only manage 7900-8000.
-
05-27-2005, 08:52 AM #10
I saw 8050 after 10 hours before any mods. Now I've only seen 7950 max (most in the pitch).
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
What should stock compression be on stock 93' waveblaster?
By mogman8 in forum Yamaha Old School SkisReplies: 4Last Post: 09-22-2014, 01:14 PM -
What should this setup be running?
By jhill19 in forum 4-Tec PerformanceReplies: 24Last Post: 08-01-2012, 03:10 PM -
What should the RPM be at idle out of water for 300x
By cmexeqtu2 in forum Kawasaki PWC Performance (4-stroke)Replies: 3Last Post: 06-13-2011, 09:49 AM -
What should stock RPM be for GP800/GP1200
By DTV in forum Yamaha Old School SkisReplies: 14Last Post: 07-28-2007, 01:17 PM -
What should my rpm be??
By DeeGee in forum 4-Tec PerformanceReplies: 7Last Post: 06-15-2006, 04:35 PM
Use a good amount of silicone around those eyelits doesn't matter if...
Ultra 150 Shredmaster 2 breather...