Results 1 to 3 of 3
Thread: 1998 pro 785
-
07-14-2007, 07:14 PM #1
- Join Date
- Jul 2007
- Location
- Manitoba, Canada
- Posts
- 41
1998 pro 785
i have a 1998 pro 785 and the polaris mrm says the 98 never came with a pump wedge and mine has one, i was wondering if it did come stock or not....also it runs only 7400 rpm with the high speeds at zero turns and has the 155 150 155 stock jetting....i operate at about 2500ft above sea level and the wash looks rich...if anybody has any experience let me know...Thanks Jason
-
07-14-2007, 07:37 PM #2
Pump wedge
It came with a 4 degree wedge, and the jetting is too rich for your altitude... This is just my opinion, but I would go down one full size on the high speed jets only..
Randy
-
07-14-2007, 08:16 PM #3
- Join Date
- Jul 2007
- Location
- Manitoba, Canada
- Posts
- 41
Thank you randy....
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
1997 vs. 1998 Pro 785 Cases
By hyoctane23 in forum Polaris Open DiscussionReplies: 3Last Post: 06-12-2013, 04:14 PM -
1998 Pro 785 water routing
By hyoctane23 in forum Polaris Open DiscussionReplies: 29Last Post: 04-17-2009, 04:13 PM -
2 1998 pro 785s for sale or part out
By tburn in forum Polaris ClassifiedsReplies: 17Last Post: 11-01-2008, 07:03 PM -
My new (to me) 1998 Pro 785
By hyoctane23 in forum Polaris Open DiscussionReplies: 58Last Post: 04-08-2008, 12:12 PM -
1998 Pro 785 reassembly and build
By goBENGALS in forum Polaris ProjectsReplies: 50Last Post: 07-12-2007, 09:32 AM
Check the camshaft timing marks with the crank at tdc compression#1, make...
Help, 2019 fx svho stage 2 with...